Friday, October 19, 2018

Productivity Improvement of Lathe - Turning Operations





Machine Work Study for Cost Reduction and Production Improvement

__________________

__________________


2018

Seco’s PCA system for Machining Cost  Reduction


Manufacturers who utilize Seco’s  Machining Productivity Cost Analysis (PCA) system can typically expect to benefit from total cost savings of up to 30 percent and productivity increases of up to 40 percent, regardless of the industry sector they serve.
https://www.cnctimes.com/articles/singleArticle/3804


2017


Productivity Theory for Industrial Engineering
By Ryspek Usubamatov
https://books.google.co.in/books?id=W7xaDwAAQBAJ&pg=1#v=onepage&q&f=false

Okuma’s new 2SP-2500H CNC lathe featuring smart machine productivity
24 October, 2017     
Okuma has launched the 2SP-2500H two-spindle CNC lathe, with innovative front-facing twin spindles to provide much higher levels of productivity and far greater reliability, for auto parts and other mass production applications. The 2SP-2500H is an automation-ready machine that integrates two lathes into one unit with a standard loader that feeds blanks for continuous front and back work.
https://www.cnctimes.com/editorial/okumas-new-2sp-2500h-cnc-lathe-featuring-smart-machine-productivity

http://www.machiningnews.com/2017/10/intelligent-machine-productivity-in-a-compact-footprint/


2016

TRIPLE-TURRET TURNING MACHINE INCREASES PRODUCTIVITY BY 86%

Case Studies    |    8 March, 2016
An Italian-built Biglia CNC lathe with twin-opposed spindles and three Y-axis turrets supplied by Whitehouse Machine Tools has taken over the manufacture of terminal lugs from 38 mm diameter copper bar at the Plymouth factory of subcontractor Morris Engineering.

The improvement has been dramatic. One-hit cycle time to machine the component at both ends has been reduced to just three minutes, compared to 21 minutes previously required by a twin-spindle lathe with a single Y-axis turret, which has now been replaced by the Biglia turning centre.
http://www.wmtcnc.com/case-studies/triple-turret-turning-machine-increases-productivity-by-86/



2006
Gear Manufacturer Gains Efficiency With Tool Management System
Avon Gear Company (Rochester Hills, Michigan)  Partnered by SECO Tools PCA system
Case Study Post: 12/21/2006
https://www.mmsonline.com/articles/gear-manufacturer-gains-efficiency-with-tool-management-system




Related

E-Factory of Misubhishi in Action
https://www.cnctimes.com/editorial/the-e-fctory-in-action-mitsubishi-electric

No comments:

Post a Comment