Optimization of Part Consolidation for Minimum Production Costs and Time Using Additive Manufacturing
Zhenguo Nie, Sangjin Jung, Levent Burak Kara, Kate S. Whitefoot
Mechanical Engineering, Carnegie Mellon University
Engineering and Public Policy, Carnegie Mellon University
Pittsburgh, PA, USA
https://meche.engineering.cmu.edu/_files/images/research-groups/whitefoot-group/NJKW-OptPartConsolidation-JMD.pdf
Selected References
[1] Yang, S., Talekar, T., Sulthan, M. A., and Zhao, Y. F., 2017, "A Generic Sustainability Assessment Model towards Consolidated Parts Fabricated by Additive Manufacturing Process," Procedia manufacturing, 10, pp. 831-844.
[2] Yang, S., Tang, Y., and Zhao, Y. F., 2015, "A new part consolidation method to embrace the design freedom of additive manufacturing," Journal of Manufacturing Processes, 20, pp. 444-449.
[3] Yang, S., and Zhao, Y. F., 2015, "Additive manufacturing enabled design theory and methodology: a critical review," The International Journal of Advanced Manufacturing Technology, 80(1), pp. 327-342.
[7] Schmelzle, J., Kline, E. V., Dickman, C. J., Reutzel, E. W., Jones, G., and Simpson, T. W., 2015, "(Re) Designing for part consolidation: understanding the challenges of metal additive manufacturing," Journal of Mechanical Design, 137(11), p.111404.
[8] Frey, D., Palladino, J., Sullivan, J., and Atherton, M., 2007, "Part count and design of robust systems," Systems engineering, 10(3), pp. 203-221.
[9] Türk, D.-A., Kussmaul, R., Zogg, M., Klahn, C., Leutenecker-Twelsiek, B., and Meboldt, M., 2017,
"Composites part production with additive manufacturing technologies," Procedia CIRP, 66, pp. 306-311.
[10] Booker, J., Swift, K., and Brown, N., 2005, "Designing for assembly quality: strategies, guidelines and techniques," Journal of Engineering design, 16(3), pp. 279-295.
[11] Boothroyd, G., Dewhurst, P., and Knight, W. A., 2001, Product Design for Manufacture and Assembly, revised and expanded, CRC press.
[12] Combemale, C., Whitefoot, K. S., Ales, L., and Fuchs, E. R., 2018, "Not All Technological Change is Equal: Disentangling Labor Demand Effects of Automation and Parts Consolidation," Available at SSRN 3291686.
[13] Taufik, M., and Jain, P. K., 2013, "Role of build orientation in layered manufacturing: a review," International Journal of Manufacturing Technology and Management, 27(1-3), pp. 47-73.
[14] Jibin, Z., "Determination of optimal build orientation based on satisfactory degree theory for RPT," Proc. Computer Aided Design and Computer Graphics, 2005. Ninth International Conference on, IEEE, p. 6 pp.
[15] Thomas, D. S., and Gilbert, S. W., 2014, "Costs and cost effectiveness of additive manufacturing," Special Publication, NIST.
[16] Alexander, P., Allen, S., and Dutta, D., 1998, "Part orientation and build cost determination in layered manufacturing," Computer-Aided Design, 30(5), pp. 343-356.
[17] Langelaar, M., 2016, "Topology optimization of 3D selfsupporting structures for additive manufacturing," Additive Manufacturing, 12, pp. 60-70.
[18] Leary, M., Merli, L., Torti, F., Mazur, M., and Brandt, M., 2014, "Optimal topology for additive manufacture: a method for enabling additive manufacture of support-free optimal structures," Materials & Design, 63, pp. 678-690.
[19] Mirzendehdel, A. M., and Suresh, K., 2016, "Support
structure constrained topology optimization for additive
manufacturing," Computer-Aided Design, 81, pp. 1-13.
[20] Paul, R., and Anand, S., 2015, "Optimization of layered
manufacturing process for reducing form errors with minimal
support structures," Journal of Manufacturing Systems, 36, pp.
231-243.
[21] Vanek, J., Galicia, J. A. G., and Benes, B., "Clever
support: Efficient support structure generation for digital
fabrication," Proc. Computer graphics forum, Wiley Online
Library, pp. 117-125.
[22] Boothroyd, G., Dewhurst, P., and Knight, W. A., 2001,
Product Design for Manufacture and Assembly, CRC press.
[23] Yang, S., Santoro, F., and Zhao, Y. F., 2018, "Towards a
numerical approach of finding candidates for additive
manufacturing-enabled part consolidation," Journal of
mechanical design, 140(4), p. 041701.
[24] Chadha, C., Crowe, K., Carmen, C., and Patterson, A.,
2018, "Exploring an AM-enabled combination-of-functions
approach for modular product design," Designs, 2(4), p. 37.
[25] Yang, S., Santoro, F., Sulthan, M. A., and Zhao, Y. F.,
2019, "A numerical-based part consolidation candidate
detection approach with modularization considerations,"
Research in Engineering Design, 30(1), pp. 63-83.
[26] Nyaluke, A., Nasser, B., Leep, H. R., and Parsaei, H. R.,
1996, "Rapid prototyping work space optimization,"
Computers and industrial engineering, 31(1-2), pp. 103-106.
[27] Canellidis, V., Dedoussis, V., Mantzouratos, N., and
Sofianopoulou, S., 2006, "Pre-processing methodology for
optimizing stereolithography apparatus build performance,"
Computers in industry, 57(5), pp. 424-436.
[28] Wodziak, J. R., Fadel, G. M., and Kirschman, C., "A
genetic algorithm for optimizing multiple part placement to
reduce build time," Proc. Proceedings of the Fifth
International Conference on Rapid Prototyping, University of
Dayton Dayton, OH, pp. 201-210.
[29] Zhang, X., Zhou, B., Zeng, Y., and Gu, P., 2002, "Model
layout optimization for solid ground curing rapid prototyping
processes," Robotics and Computer-Integrated Manufacturing,
18(1), pp. 41-51.
[30] Hur, S.-M., Choi, K.-H., Lee, S.-H., and Chang, P.-K.,
2001, "Determination of fabricating orientation and packing in
SLS process," Journal of Materials Processing Technology,
112(2-3), pp. 236-243.
[31] Canellidis, V., Giannatsis, J., and Dedoussis, V., 2013,
"Efficient parts nesting schemes for improving
stereolithography utilization," Computer-Aided Design, 45(5),
pp. 875-886.
[32] Zhang, Y., Gupta, R. K., and Bernard, A., 2016, "Twodimensional placement optimization for multi-parts production
in additive manufacturing," Robotics and Computer-Integrated
Manufacturing, 38, pp. 102-117.
[33] Gogate, A., and Pande, S., 2008, "Intelligent layout
planning for rapid prototyping," International Journal of
Production Research, 46(20), pp. 5607-5631.
[34] Wu, S., Kay, M., King, R., Vila-Parrish, A., and Warsing,
D., "Multi-objective optimization of 3D packing problem in
additive manufacturing," Proc. IIE Annual Conference.
Proceedings, Institute of Industrial and Systems Engineers
(IISE), p. 1485.
[35] Pandey, P. M., Thrimurthulu, K., and Reddy, N. V., 2004,
"Optimal part deposition orientation in FDM by using a
multicriteria genetic algorithm," International Journal of
Production Research, 42(19), pp. 4069-4089.
[36] Thrimurthulu, K., Pandey, P. M., and Reddy, N. V., 2004,
"Optimum part deposition orientation in fused deposition
modeling," International Journal of Machine Tools and
Manufacture, 44(6), pp. 585-594.
[37] Phatak, A. M., and Pande, S. S., 2012, "Optimum part
orientation in rapid prototyping using genetic algorithm,"
Journal of manufacturing systems, 31(4), pp. 395-402.
[38] Huang, R., Ulu, E., Kara, L. B., and Whitefoot, K. S.,
"Cost Minimization in Metal Additive Manufacturing Using
Concurrent Structure and Process Optimization," Proc. ASME
2017 International Design Engineering Technical Conferences
and Computers and Information in Engineering Conference,
American Society of Mechanical Engineers, pp.
V02AT03A030-V002AT003A030.
[39] Johnson, M., and Kirchain, R., 2009, "Quantifying the
effects of parts consolidation and development costs on
material selection decisions: A process-based costing
approach," International Journal of Production Economics,
119(1), pp. 174-186.
[40] Rickenbacher, L., Spierings, A., and Wegener, K., 2013,
"An integrated cost-model for selective laser melting (SLM),"
Rapid Prototyping Journal, 19(3), pp. 208-214.
[41] Ulu, E., Huang, R., Kara, L. B., and Whitefoot, K. S.,
2018, "Concurrent Structure and Process Optimization for
Minimum Cost Metal Additive Manufacturing," Journal of
Mechanical Design.
[42] Baumers, M., Dickens, P., Tuck, C., and Hague, R., 2016,
"The cost of additive manufacturing: machine productivity,
economies of scale and technology-push," Technological
forecasting social change, 102, pp. 193-201.
[43] Dinda, S., Modi, D., Simpson, T. W., Tedia, S., and
Williams, C. B., "Expediting Build Time, Material, and Cost
Estimation for Material Extrusion Processes to Enable Mobile
Applications," Proc. ASME 2017 International Design
Engineering Technical Conferences and Computers and
Information in Engineering Conference, American Society of
Mechanical Engineers, pp. V02AT03A034-V002AT003A034.
[44] Ruffo, M., Tuck, C., and Hague, R., 2006, "Cost
estimation for rapid manufacturing-laser sintering production
for low to medium volumes," Proceedings of the Institution of
Mechanical Engineers, Part B: Journal of Engineering
Manufacture, 220(9), pp. 1417-1427.
[45] Yim, S., and Rosen, D., "Build time and cost models for
additive manufacturing process selection," Proc. ASME 2012
international design engineering technical conferences and
computers and information in engineering conference,
American Society of Mechanical Engineers, pp. 375-382.
[46] Ulu, E., Korkmaz, E., Yay, K., Ozdoganlar, O. B., and
Kara, L. B., 2015, "Enhancing the structural performance of
additively manufactured objects through build orientation
optimization," Journal of Mechanical Design, 137(11), p.
111410
[47] Gong, H., Rafi, K., Gu, H., Starr, T., and Stucker, B.,
2014, "Analysis of defect generation in Ti–6Al–4V parts made
using powder bed fusion additive manufacturing processes,"
Additive Manufacturing, 1, pp. 87-98.
[48] Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E.,
Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R.,
and Wicker, R. B., 2012, "Metal fabrication by additive
manufacturing using laser and electron beam melting
technologies," Journal of Materials Science and Technology,
28(1), pp. 1-14.
[49] Nie, Z., Wang, G., McGuffin-Cawley, J. D., Narayanan,
B., Zhang, S., Schwam, D., Kottman, M., and Rong, Y. K.,
2016, "Experimental Study and Modeling of H13 Steel
Deposition Using Laser Hot-Wire Additive Manufacturing,"
Journal of Materials Processing Technology, 235, pp. 171-
186.
[50] Toh, W. Q., Wang, P., Tan, X., Nai, M. L. S., Liu, E., and
Tor, S. B., 2016, "Microstructure and wear properties of
electron beam melted Ti-6Al-4V parts: A comparison study
against as-cast form," Metals, 6(11), p. 284.
[51] Inc., S., 2015, "Advantages of Wire AM vs. Powder
AM," http://www.sciaky.com/additive-manufacturing/wiream-vs-powder-am.
[52] Gockel, J., Beuth, J., and Taminger, K., 2014, "Integrated
control of solidification microstructure and melt pool
dimensions in electron beam wire feed additive manufacturing
of Ti-6Al-4V," Additive Manufacturing, 1-4, pp. 119-126.
[53] Chen, N., and Frank, M. C., "A method for metal AM
support structure design to facilitate removal," Proc. Solid
Freeform Fabrication, pp. 1516-1524.
[54] Vaidya, R., and Anand, S. J. P. M., 2016, "Optimum
support structure generation for additive manufacturing using
unit cell structures and support removal constraint," 5, pp.
1043-1059.
[55] Jebari, K., and Madiafi, M., 2013, "Selection methods for
genetic algorithms," International Journal of Emerging
Sciences, 3(4), pp. 333-344.
[56] Inc., S., 2016, "EBAM 300 Series,"
https://www.aniwaa.com/product/3d-printers/sciaky-ebam300-series/.
No comments:
Post a Comment