Ph.D. in Industrial and Management Systems Engineering, The Pennsylvania State University, 1987
M.S. in Science & Technology, Western Carolina University, 1983
B.S. in Electrical Engineering, National Institute of Technology (ex KREC - Surathkal, University of Mysore), 1976
Bidanda, B., and Redfern, M., "Development of a Microcomputer Based Slip Tester," To appear in Computers and Industrial Engineering Journal.
Hu, G., Wang, L., Chen, Y., and Bidanda, B., "An Oligopoly Model to Analyze the Market and Social Welfare for Green Manufacturing Industry," To appear in Journal of Cleaner Production.
Basu, S., and Bidanda, B., 2013, "Eco-efficient construction and building materials," in Shortcomings of eco-labelling of construction and building materials, E.A. Pacheco-Torgal, ed., Woodhead Publishing.
Bidanda, B., and Norman, B.A., 2012, "Enhancing Endoscope Reprocessing within the VA Health System," Industrial & Systems Engineering Research Conference, Orlando, Florida.
Desai, S., Bidanda, B., and Lovell, M., 2012, "Material and process Selection in product design using decision-making techniques (AHP)," European Journal on Industrial Engineering, no.3.
Wu, S., Shuman, L., Bidanda, B., Baleban, C., and Sochats, K., 2012, "A Hybrid Modeling Framework to Simulate Disaster Response Decisions," International Journal of Advanced Intelligence Paradigms, no.1.
Bidanda, B., Hu, G., Shankar, M.R., Abolghasem, S., and Basu, S., 2011, "Assessing the Environmental Footprint of Manufactured Products: A Survey of Current Literature," International Journal of Production Economics.
Bidanda, B., Hu, G., Wang, L.Z., and Chen, Y., 2011, "An Oligopoly Model to Analyze the Market and Social Welfare for Green Manufacturing Industry," International Conference on Production Research, Stuttgart.
Hu, G., Wang, L.Z., Chen, Y., and Bidanda, B., 2011, "An Oligopoly Model to Analyze the Market and Social Welfare for Green Manufacturing Industry," International Conference on Production Research, Stuttgart.
Arisoy, O., and Bidanda, B., 2009, "Strategic Decision Making in Global Supply Networks," in Strategic Information Systems, M.G. Hunter, ed..
Arisoy, O., Azim, M., and Bidanda, B., 2009, "Project Management in a Flat World Circa 2025," in Project Management Circa 2025, B. Bidanda, and D. Cleland, eds., Project Management Institute.
Cleland, D., and Bidanda, B., 2009, "PROJECT MANAGEMENT CIRCA 2025," Project Management Institute.
Gaussin, M., Hu, G., Shankar, R., and Bidanda, B., 2009, "Assessing the Environmental Footprint of Manufactured Products: A Survey of Current Literature," International Conference on Production Research, Shanghai.
Hu, G., and Bidanda, B., 2009, "A Product Upgrade Decision Model for Sustainable Manufacturing," Industrial Engineering Research Conference, Miami, Florida.
Hu, G., and Bidanda, B., 2009, "Modeling Sustainable Product Life Cycle Decision Support Systems," Int. J. Production Economics.
Hu, G., Wang, L., and Bidanda, B., 2009, "A Multi-objective Model for Project Portfolio Selection to Implement Lean and Six Sigma Concepts," International Journal of Production Research, no.23, pp. 6611-6625.
Hu, G., Wang, L., and Bidanda, B., 2009, "Sustainable Manufacturing and Project Management Circa 2025," in Project Management Circa 2025, B. Bidanda, and D. Cleland, eds., Project Management Institute.
Bidanda, B., and Bartolo, P., 2008, "VIRTUAL PROTOTYPING & BIO-MANUFACTURING IN MEDICAL APPLICATIONS," Springer Science Publishers.
Arisoy, O., and Bidanda, B., 2008, "Strategic Decision Making in Global Supply Networks," in Encyclopedia of Networked & Virtual Organizations, M.M. Cunha, and G.D. Putnik, eds., Information Science Reference, pp. 1509-1515.
Bunce, M., Wang, L., and Bidanda, B., 2008, "Leveraging Six Sigma with Industrial Engineering tools in Crateless Retort Production," International Journal of Production Research, pp. 6701-6719.
Dhawan, A., Srinivasan, S., Rajib, P., and Bidanda, B., 2008, "Minimizing total cost and regular and emergency sources: a neuro-dynamic programming approach," International Journal of Production Research.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., and Balaban, C., 2008, "Agent-based discrete event simulation modeling for disaster responses," J. Fowler, and S. Mason, eds., pp. 1908-13.
Wu, S., Shuman, L., Bidanda, B., Prokopyev, O., Kelley, M., Sochats, K., and Balaban, C., 2008, "Simulation-based decision support system for real-time disaster response management," J. Fowler, and S. Mason, eds., pp. 58-63.
Bartolo, P., and Bidanda, B., 2007, "BIO-MATERIALS AND PROTOTYPING APPLICATIONS IN MEDICINE," Springer Science Publishers.
Cohen, Y., Wang, M., and Bidanda, B., 2007, "Modeling and implementation of agent-based discrete industrial automation," in Innovative algorithms and techniques in automation, industrial electronics and telecommunications, K. Elleithy, M. Karim, A. Mahmood, and T. Sobh, eds., Springer, pp. 535-541.
Desai, S., Bidanda, B., and Bartolo, P., 2007, "Metallic and Ceramic Biomaterials: Current and Future Directions," in Bio Materials and Prototyping Applications in Medicine, P. Bartolo, and B. Bidanda, eds., Springer.
Hu, G., and Bidanda, B., 2007, "Modeling Sustainable Product Lifecycle Decision Support Systems," Chile.
Hu, G., Wang, L., and Bidanda, B., 2007, "Project Portfolio Selection for Implementing Lean and Six Sigma Concepts," Nashville.
Hu, G., Wang, L., Wang, Y., and Bidanda, B., 2007, "A New Model for Closed Loop Product Lifecycle Systems," Nashville.
Srinivasan, S., Jain, C., and Bidanda, B., 2007, "Software and Other Project Management Practices in India," in Project Manager's Handbook: Applying Best Practices across Global Industries, D. Cleland, and L.R. Ireland, eds., McGraw Hill.
Wang, L., Hu, G., and Bidanda, B., 2007, "A Game Theoretic Model of the Market Competition between Green and Ordinary Products," Proceedings of the 2007 Industrial Engineering Research Conference, Nashville.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., and Balaban, C., 2007, "Disaster policy optimization: A simulation based approach," pp. 872-877, Nashville.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., and Balaban, C., 2007, "Embedding GIS in disaster simulation," 27th Annual ESRI International User Conference.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K.M., and Balaban, C., 2007, "Embedding GIS in disaster simulation."
Wu, S., Shuman, L.J., Bidanda, B., Kelley, M., Lawson, B., Sochats, K.M., and Balaban, C.D., 2007, "System implementation issues of Dynamic Discrete Disaster Decision Simulation System (D4S2) - Phase I," R.R. Barton, B. Biller, S.G. Henderson, M. Hsieh, J. Shortle, and J.D. Tew, eds., pp. 1127-34.
Bidanda, B., and Arisoy, O., 2006, "Project Management in an Outsourcing Environment," in The Global Project Management Handbook (2nd Edition), D. Cleland, and R. Gareis, eds..
Bidanda, B., Arisoy, O., and Shuman, L.J., 2006, "Colombia & the New Global Economy: Implications of Tratado de Libre Comercio for Colombian Industry, Engineers & Engineering Educators," Revista de ingenieria, pp. 83-90.
Bidanda, B., Arisoy, O., and Shuman, L.J., 2006, "Offshoring Manufacturing: Implications for engineering jobs and education: A survey and case study," Robotics and Computer Integrated Manufacturing, no.6.
Arisoy, O., Bidanda, B., and Shuman, L., 2006, "Multi-expert multi-criteria decision making in outsourcing," Orlando.
Arisoy, O., Gokhan, M., Needy, K.L., and Bidanda, B., 2006, "Activity Based Costing and Life Cycle Costing in Outsourcing Decision Analysis," Orlando.
Cohen, Y., Wang, M.E., and Bidanda, B., 2006, "Modeling and Implementation of Agent-Based Discrete Industrial Automation," International Conference on Industrial Electronics, Technology & Automation.
Creehan, K., and Bidanda, B., 2006, "Computer-Aided Reverse Engineering of the Human Musculo-skeletal system," Virtual & Physical Prototyping, no.2.
Hu, G., Wang, Y., and Bidanda, B., 2006, "PLM Systems for Network-centric manufacturing," Orlando.
Hu, G., Wang, Y., and Bidanda, B., 2006, "Product Life cycle management challenges in trans-national environments," Orlando.
Lai, J.P., Shuman, L.J., and Bidanda, B., 2006, "A Surrogate Approach to Simulation Optimization," Orlando.
Puthpongsiriporn, T., Porter, D.J., Bidanda, B., Wang, M.E., and Billo, R.E., 2006, "Attribute-Level Neighbor Hierarchy Construction Using evolved Pattern-based Knowledge Induction," IEEE Transactions on Knowledge and Data Engineering, no.7.
Bidanda, B., Arisoy, O., and Shuman, L., 2005, "Manufacturing Outsourcing: Implications for Engineering Jobs & Education," FAIM 2005 Conference, pp. 884-892, Bilbao, Spain.
Bidanda, B., Arisoy, O., and Shuman, L.J., 2005, "The New Global Economy: Implications for Manufacturing Engineers and Educators."
Bidanda, B., Ariyawongrat, P., Needy, K.L., Norman, B.A., and Tharmmaphornphilas, W., 2005, "Human Related Issues in Manufacturing Cell Design, Implementation, and Operation: A Review & Survey," International Journal of Computers & Industrial Engineering, no.48, pp. 507-523.
Bidanda, B., Shuman, L.J., Thomes, K., and Arisoy, O., 2005, "Adapting Engineering Coursework for Increased Global Relevance," Annual Conference of the American Society for Engineering Education, Salt Lake City.
Alrashdan, A., Motavalli, S., and Bidanda, B., 2005, "Creation of Surface Models for Re-engineering of Manufactured Parts," International Conference of Production Research, Italy.
Cohen, Y., Bidanda, B., and Rokach, L., 2005, "A New Technique for Modeling & Implementation of Agent-Based Discrete Industrial Automation," FAIM 2005 Conference, pp. 424-431, Bilbao, Spain.
Creehan, K., and Bidanda, B., 2005, "Computer Aided Reverse Engineering of Human Tissues," pp. 155-160.
Needy, K., Norman, B.N., Besterfield-Sacre, M.B., Rajgopal, J., and Bidanda, B., 2005, "Integration and Synthesis of the Industrial Engineering Curriculum via an Unstructured Problem Solving Course," Annual Conference of the American Society for Engineering Education, Salt Lake City.
Shuman, L.J., Bidanda, B., Thomes, K., and Feick, L., 2005, "The Global and Societal Challenge - An Innovative Approach to ABET Criterion 3.H. and beyond," Annual Conference of the American Society for Engineering Education, Salt Lake City.
Bidanda, B., and Bartolo, P., 2004, "Guest Editorial - Product Development," International Journal of Product Development, no.2.
Bidanda, B., and Desai, S., 2004, "Strategic planning models for prototyping and product development centers," International Journal of Product Development, no.2.
Norman, B.A., Besterfield-sacre, M.E., Bidanda, B., Needy, K.L., and Rajgopal, J., 2004, "A Conceptual Model for Integrating and Synthesizing the industrial engineering curriculum," American Society for Engineering Education Annual Conference, Salt Lake City.
Sunanta, O., and Bidanda, B., 2004, "A Comparison of Manual and Mechanical Lapping Methods on Valve Re-conditioning," Industrial Engineering Research Conference, Houston.
Bidanda, B., Desai, S., and Lovell, M., 2003, "The Business of Virtual and Rapid Prototyping," pp. 91-95.
Needy, K.L., Nachtmann, H., Roztocki, N., Warner, R.N., and Bidanda, B., 2003, "Implementing Activity Based Costing Systems in Small Manufacturing Firms: A Field Study," Engineering Management Journal, no.1, pp. 3-10.
Needy, K.L., Norman, B.A., Bidanda, B., Ariyawongrat, P., Tharmmaphornphilas, W., and Warner, R.C., 2002, "Assessing human capital: A lean manufacturing example," Engineering Management Journal, no.3, pp. 35-39.
Norman, B.A., Tharmmaphornphilas, W., Needy, K.L., Bidanda, B., and Warner, R.C., 2002, "Worker Assignment in cellular manufacturing considering technical and human skills," International Journal of Production Research, no.6, pp. 1479-1492.
Bidanda, B., Needy, K.L., and Norman, B.A., 2001, "Worker Assignment for cellular manufacturing considering technical, human, and lean skills," 2001 NSF Design, Service and Manufacturing Grantees and Research Conference, Tampa, FL.
Bidanda, B., Shuman, L.J., Rajgopal, J., Besterfield-sacre, M.E., and Rubial, C., 2001, "Flexible Doctoral Programs for International faculty: A Refined Model with preliminary results," International Conference for Engineering Education, Oslo.
Creehan, K., and Bopaya, B., 2001, "Computer Aided Reverse Engineering of Human Tissues and Structures," International Conference of Production Research, Prague.
Needy, K.L., Norman, B.A., Bidanda, B., Tharmmphornphilas, W., Aiyawongrat, P., and Warner, R.C., 2001, "Human Capital Assessment in Lean Manufacturing," American Society for Engineering Management Proceedings, pp. 233-239, Huntsville, AL.
Rafe, G.E., Needy, K.L., Bidanda, B., and Schmidt, T.A., 2001, "Delivering continuous manufacturing education and training via internet-based distributed virtual laboratories," 2001 Frontiers in Education Conference, Reno, NV.
Sunant, O., and Bidanda, B., 2001, "A Fuzzy Logic Advisory System for Flat Surface Lapping," International Conference of Production Research, Prague.
Bidanda, B., 2000, "Assembly Line Balancing," in Maynard Industrial Engineering Handbook, K. Zandin, ed., McGraw Hill.
Bidanda, B., Aguwa, C., and Nnaji, B., 2000, "A Manufacturing Modernization Model for Developing Countries," 5th USA-Africa Conference on Manufacturing Technology, Abuja, Nigeria.
Bidanda, B., Needy, K.L., and Norman, B.A., 2000, "Worker Assignment for cellular manufacturing considering human issues," 2000 NSF Design and Manufacturing Research Conference, Vancouver, British Columbia.
Bidanda, B., Needy, K.L., Norman, B.A., and Warner, R., 2000, "Skills and Cells," World Symposium GT-CM 2000, San Juan, Puerto Rico.
Billo, R.E., Bidanda, B., and Adickes, M., 2000, "Bar Codes and Other Data Collection Methods," in Maynard Industrial Engineering Handbook, K. Zandin, ed., McGraw Hill.
Carnahan, B., Warner, R.C., Bidanda, B., and Needy, K.L., 2000, "Predicted glass furnace output using statistical and neural computing methods," International Journal of Production Research, no.6, pp. 1255-1269.
Maitra, A., Bidanda, B., and Nnaji, B., 2000, "A Framework for Task Level Programming in Automated Storage and Retrieval Systems," 9th Industrial Engineering Research Conference, Cleveland, OH.
Needy, K.L., Bidanda, B., and Gulsen, M., 2000, "A model for the development, assessment, and validation of activity based costing systems for small manufacturers," Engineering Management Journal, no.1, pp. 31-38.
Needy, K.L., and Bidanda, B., 2000, "Production Flow Strategies," in Maynard Industrial Engineering Handbook, K. Zandin, ed., McGraw Hill.
Norman, B.A., Tharmmaphornphilas, W., Needy, K.L., Bidanda, B., and Warner, R.C., 2000, "Assigning workers to tasks considering technical and human skills," 9th Industrial Engineering Research Conference, Cleveland, OH.
Rafe, G., Needy, K.L., and Bidanda, B., 2000, "Motivations for a distributed virtual laboratory for continuous manufacturing education and training," 2000 American Society for Engineering Education Annual Conference, St. Louis, MO.
Bidanda, B., and Needy, K.L., 1999, "Development of an activity based costing system in your small company," Industrial Engineering Solutions '99 Conference, pp. 58-63, Phoenix, AZ.
Bidanda, B., Colosimo, R.L., Warner, P.J., and Billo, R.E., 1999, "Project Management & Implementation of Cellular Manufacturing," in Handbook of Cellular Manufacturing Systems, S. Irani, ed., John Wiley & Sons.
Rafe, G., Needy, K.L., and Bidanda, B., 1999, "Motivations for a distributed virtual laboratory for continuous manufacturing education and training," American Society for Engineering Education Annual Conference, Charlotte, NC.
Bidanda, B., Kadidal, M., and Billo, R., 1998, "Development of an Intelligent Castability and Cost Estimation System," International Journal of Production Research, no.2, pp. 547-568.
Billo, R.E., and Bidanda, B., 1998, "Part Family Identification: The Role of Engineering Databases," in Group Technology & Cellular Manufacturing: State-Of-The-Art Synthesis of Research and Practice, Kluwer Academic Publishers.
Cohen, Y., Bidanda, B., and Billo, R., 1998, "Accelerating the Generation of Work Measurement Standards through Automatic Speech Recognition: A Laboratory Study," International Journal of Production Research, no.10, pp. 2701-2715.
Petri, K., Billo, R., and Bidanda, B., 1998, "A Neural Network Process Model for Abrasive Flow Machining Operations," Journal of Manufacturing Systems, no.1, pp. 52-64.
Aguwa, C.C., Bidanda, B., and Nnaji, B.O., 1997, "Shared Manufacturing in Developing Countries: An African Perspective," The Fourth Africa-USA International Conference on Manufacturing Technology, Pittsburgh.
Billo, R.E., Bidanda, B., and Adickes, M., 1997, "Performance Testing of Hand-Held Scanners for 2D Barcode Symbologies," Factory Automation & Integrated Manufacturing (FAIM) Conference, York, U.K..
Bidanda, B., and Billo, R., 1996, "Parametric Design and NC Code Generation of Countersink Cutting Tools," International Journal of Computer Integrated Manufacturing, no.2, pp. 105-112.
Berardi, M., and Bidanda, B., 1996, "A Non-traditional Economic Justification Model for Advanced Technologies," the 5th Industrial Engineering Research Conference, Minneapolis, Minnesota.
Billo, R., Bidanda, B., and Tate, D., 1996, "A Genetic Cluster Algorithm for the Machine Component Grouping Problem," Journal of Intelligent Manufacturing, no.3, pp. 1-13.
Billo, R., Bidanda, B., Cohen, Y., Fei, C.Y., and Petri, K.L., 1996, "Performance Standards and Testing of Two-Dimensional Bar Code Systems for Overhead Scanning," Journal of Manufacturing Systems, no.5, pp. 305-315.
Billo, R., Needy, K., and Bidanda, B., 1996, "Challenges Facing Information Technologies to Support World Class Manufacturing Practices," Computers In Industry, pp. 163-165.
Cleland, D., Bidanda, B., and Chung, C., 1996, "Human Issues in Technology Implementation - Part 2," Industrial Management, no.5, pp. 15-16.
Cohen, Y., Bidanda, B., Billo, R.E., and Zandin, K.B., 1996, "On Integrating Work Measurement Systems with Voice Recognition Technologies," the 5th Industrial Engineering Research Conference, Minneapolis, Minnesota.
Cohen, Y., and Bidanda, B., 1996, "A Discrete Control Modeling Technique for Automated Industrial Systems," the Embedded Computing Conference, Paris.
Maitra, A., Bidanda, B., and Rubinovitz, J., 1996, "Need for the Development of a Generic Programming Interface for Industrial Robots," the SPIE Conference, pp. 89-95.
Wilhelm, M., Smith, A.E., and Bidanda, B., 1996, "Integrating an Expert System and a Neural Network for Process Planning," Engineering Design and Automation, no.4, pp. 259-269.
Wilhelm, M., Smith, A.E., and Bidanda, B., 1996, "Process Planning Using an Integrated Expert System and Neural Network Approach," in Hybrid Intelligent Systems Applications, J. Liebowitz, ed., Cognizant Communications/ISIS, pp. 3-23.
Bidanda, B., and Billo, R., 1995, "On the Use of Students for Developing Engineering Laboratories," Journal of Engineering Education, no.2, pp. 205-212.
Bidanda, B., and Billo, R.E., 1995, "On the Development of an Intelligent Speech-Based Work Measurement System," the 5th International FAIM Conference, Stuttgart, Germany.
Bidanda, B., and Needy, K.L., 1995, "Activity Based Costing for Small Manufacturers," the Fourth I.E. Research Conference, Nashville, TN.
Bidanda, B., Billo, R.E., and Cohen, Y., 1995, "A New Generation of Two Dimensional Bar Code Symbologies," the 13th International Conference on Production Research, Jerusalem.
Billo, R., and Bidanda, B., 1995, "Representing group technology classification and coding techniques with object oriented modeling," IIE Transactions, pp. 542-554.
Billo, R.E., Bidanda, B., and Kharbanda, P., 1995, "Re-Engineering Process Plans for Manufacturing Cell Design: A Case Study," the 13th International Conference on Production Research, Jerusalem.
Billo, R.E., and Bidanda, B., 1995, "Testing of Two-Dimensional Bar Code Systems for Overhead Sortation and Tracking," the Fourth I.E. Research Conference, Nashville, TN.
Burns, G., and Bidanda, B., 1995, "Modular Hierarchical Control Networks for the Specification and Implementation of Automated Manufacturing Control Systems," the Fourth I.E. Research Conference, Nashville, TN.
Cleland, D.I., Bidanda, B., and Chung, C., 1995, "Human Issues in Technology Implementation - Part 1," Industrial Management, no.4, pp. 22-27.
Cohen, Y., and Bidanda, B., 1995, "A New Generation of Work Measurement Systems for Manufacturing & Industrial Applications," the 13th International Conference on Production Research, Jerusalem.
Petri, K.L., Billo, R.E., and Bidanda, B., 1995, "The Development of Non-traditional Process Models for Extrusion Honing," the Fourth I.E. Research Conference, Nashville, TN.
Bidanda, B., and Hosni, Y., 1994, "Reverse Engineering and its Relevance to Industrial Engineering: A Critical Overview," Computers and Industrial Engineering Journal, no.2, pp. 343-348.
Bidanda, B., Narayanan, V., and Billo, R., 1994, "Reverse Engineering & Rapid Prototyping," in Handbook of Automation and Manufacturing Systems, R.C. Dorf, and A. Kusiak, eds., John Wiley & Sons.
Billo, R., Bidanda, B., and Kharbanda, P., 1994, "Re-Engineering Process Plans for Effective Manufacturing Cell Formation," International Journal of Manufacturing Systems Design, no.3, pp. 217-229.
Billo, R., Bidanda, B., and Peternel, J., 1994, "Enhancing Classification and Coding Techniques with Object Oriented Modeling for Group Technology Applications," the Third I.E. Research Conference, pp. 549-554, Atlanta, GA.
Billo, R., Bidanda, B., and Tate, D., 1994, "A Genetic Algorithm Formulation of the Cell Formation Problem," 16th Int. Conference on Computers and Industrial Engineering, Ashikaga, Japan.
Billo, R., and Bidanda, B., 1994, "A Student Advising System for Undergraduate Engineering Curricular Scheduling," Computers in Education, no.3, pp. 205-213.
Burns, G., and Bidanda, B., 1994, "An Iconic Programming System for Flexible Control of Automated Systems," ISRAM 1994, Maui.
Burns, G., and Bidanda, B., 1994, "An Integrated Petri Net Environment for Analysis and Logic Control of Manufacturing Systems," the Third I.E. Research Conference, Atlanta, GA.
Burns, G., and Bidanda, B., 1994, "The Use of Hierarchical Petri Nets for the Automatic Generation of Ladder Logic Programs," the ESD/IPC' 94 Conference & Exposition, pp. 169-179, Detroit, MI.
Dharwadkar, S., Bidanda, B., and Cleland, D., 1994, "Shared Manufacturing Assistance Center Project: A New Product Development," in THE GLOBAL PROJECT MANAGEMENT HANDBOOK, D. Cleland, and R. Gareis, eds., McGraw Hill.
Motavalli, S., and Bidanda, B., 1994, "Modular Software Development for Digitizing Data Analysis in Reverse Engineering," Computers and Industrial Engineering Journal, no.2, pp. 395-410.
Redfern, M., and Bidanda, B., 1994, "Slip Resistance of the Shoe-Floor Interface Under Bio-mechanically Relevant Conditions," Ergonomics, no.3, pp. 511-524.
Sergio, B., Smith, A., and Bidanda, B., 1994, "Reducing Waste in Casting with a Predictive Neural Model," Journal of Intelligent Manufacturing, pp. 277-286.
Bidanda, B., Billo, R., and Peternel, J., 1993, "Computer Aided Feature Based Design and NC Code Generation of Countersink Tools," the FAIM 1993 Conference, CRC Press, pp. 245-254, Limerick, Ireland.
Bidanda, B., Cleland, D., and Dharwadkar, S., 1993, "Shared Manufacturing: An Approach to Global Competitiveness," the FAIM 1993 Conference, CRC Press, pp. 55-66, Limerick, Ireland.
Bidanda, B., Cleland, D.I., and Dharwadkar, S., 1993, "SHARED MANUFACTURING SYSTEMS: A GLOBAL PERSPECTIVE," McGraw-Hill Book Company, New York.
Bidanda, B., Cohen, P.H., and Tunasar, C., 1993, "FIXPERT: A Rule Based System for Workholding Device Selection of Rotational Parts," in EXPERT SYSTEMS IN PRODUCTION & MANUFACTURE: STRUCTURE AND RULES, S. Anand, and A. Mital, eds., Chapman and Hall.
Bidanda, B., Rubinovitz, J., and Narayanan, V., 1993, "CAD-Based Interactive Off-line Programming of Spray Glazing Robots," International Journal of Computer Integrated Manufacturing, no.6, pp. 357-365.
Ben-Brahim, S., Smith, A., and Bidanda, B., 1993, "Relating Product Specifications and Performance Data with a Neural Network Model for Design Improvement," Journal of Intelligent Manufacturing, pp. 367-374.
Billo, R.E., and Bidanda, B., 1993, "The Start Up of an Automated Data Collection Laboratory," 4th Annual Automatic Identification Educators Conference, Philadelphia.
Burns, G., Rajgopal, J., and Bidanda, B., 1993, "Integrating Group Technology and TSP for Scheduling Operations with Sequence Dependent Setup Times," the Second I.E. Research Conference, pp. 837-841, Los Angeles, CA.
Narayanan, V., Bidanda, B., and Rubinovitz, J., 1993, "Off-Line Programming and Path Planning of Spray Glazing Robots," the XIII International Conference for Production Research (ICPR), Elsevier Science Publishers.
Rajgopal, J., and Bidanda, B., 1993, "On the Use of Statistical Design in Manufacturing Engineering Education," International Journal of Applied Engineering Education, no.4.
Smith, A., Martinez, S., and Bidanda, B., 1993, "A Neural Predictive Quality Model for Slip Casting Using Categorical Metrics," the Second I.E. Research Conference, pp. 265-269, Los Angeles, CA.
Bidanda, B., and Muralikrishnan, C.K., 1992, "Flexible Fixtures for Intelligent Manufacturing," in Intelligent Design and Manufacturing, A. Kusiak, ed., John Wiley & Sons.
Bidanda, B., Shuman, L., and Puerzer, R., 1992, "On Teaching CAD Concepts to Industrial Engineers," Engineering Design Graphics Journal, no.2, pp. 11-18.
Ben-Brahim, S., Smith, A., and Bidanda, B., 1992, "Estimating Product Performance and Quality from Design Parameters Via Neural Networks," the First I.E. Research Conference, Chicago, IL.
Cleland, D., Bidanda, B., and Dharwadkar, S., 1992, "A Shared Manufacturing Assistance Center Project," the Project Management Institute Seminar & Symposium, pp. 466-473, Pittsburgh, PA.
Motavalli, S., and Bidanda, B., 1992, "Modular Software Development for Reverse Engineering Applications," the First I.E. Research Conference, Chicago, IL.
Narayanan, V., Rubinovitz, J., and Bidanda, B., 1992, "On the Development of Computer Based Path Planning Strategies for Robotic Spray Glazing," Computers and Industrial Engineering Journal, pp. 15-18.
Bidanda, B., Motavalli, S., and Harding, K., 1991, "Reverse Engineering: An Evaluation of Prospective Non-Contact Technologies and Applications in Manufacturing Systems," International Journal of Computer Integrated Manufacturing, no.3, pp. 145-156.
Bidanda, B., Rubinovitz, J., and Narayanan, V., 1991, "Off-line Programming for Robotic Spray Glazing Cell," Fourth World Conference on Robotics Research, Pittsburgh, PA.
Bidanda, B., Shuman, L., and Puerzer, R., 1991, "On Teaching CAD Concepts to Industrial Engineers," the ASEE Conference, New Orleans.
Motavalli, S., and Bidanda, B., 1991, "Development of a Part Image Reconstruction System for Reverse Engineering of Design Modifications," Journal of Manufacturing Systems, no.5.
Rajgopal, J., and Bidanda, B., 1991, "On Scheduling Parallel Machines with Two Setup Classes," International Journal of Production Research, no.12, pp. 2443-2458.
Redfern, M., and Bidanda, B., 1991, "Programmable Shoe/Floor Tester to Evaluate Floor Slipperiness," in ADVANCES IN INDUSTRIAL ERGONOMICS AND SAFETY III, W. Karwowski, and J.W. Yates, eds., Taylor & Francis.
Bidanda, B., and Cleland, D.I., 1990, "THE AUTOMATED FACTORY HANDBOOK: TECHNOLOGY AND MANAGEMENT," Tab Professional and Reference Books, Blue Ridge Summit, PA.
Bidanda, B., and Motavalli, S., 1990, "On the Applications of Part Image Reconstruction Systems in Automated Manufacturing," 5th International conference on CAD/CAM, Robotics and Factories of the Future, Elsevier Science Publishers, Norfolk, Virginia.
Bidanda, B., and Rajgopal, J., 1990, "Optimal Selection of Workholding Devices for Rotational Parts," IIE Transactions, no.1.
Bidanda, B., Motavalli, S., and Patterson, G.P., 1990, "On the Development of a Computerized System for Cephalometric Analysis," Journal of Medical Systems, no.1.
Burhanuddin, S., and Bidanda, B., 1990, "Industrial Robots," in THE AUTOMATED FACTORY HANDBOOK; TECHNOLOGY AND MANAGEMENT, B. Bidanda, and D.I. Cleland, eds., Tab Professional and Reference Books (Division of McGraw-Hill), Blue Ridge Summit, PA.
Bidanda, B., and Cleland, D., 1989, "Techniques to Assess Project Feasibility," Project Management Journal, no.2.
Bidanda, B., and Motavalli, S., 1989, "Reverse Engineering using Structured Lighting," 4th International Conference on CAD/CAM, Robotics and Factories of the Future, Elsevier Science Publishers, Delhi, India.
Bidanda, B., Rubinovitz, J., and Raman, S., 1989, "Development of a Spatter Index for Automated Welding Inspection Using Computer Vision," Computers in Industrial Engineering Journal, no.2, pp. 215-224.
Knott, K., Bidanda, B., and Pennebaker, D., 1988, "The Economics of Robotic Welding," The International Journal of Production Research, no.1.
Bidanda, B., and Knott, K., 1987, "Roadblocks to Robotic Welding," Journal of Methods-Time Measurement.
Bidanda, B., "Designing and Implementing Large Scale Cellular Manufacturing Systems," Banff.
Bidanda, B., "Designing and Implementing Large Scale Cellular Manufacturing Systems," IIE Solutions Conference, Banff.
Bidanda, B., and Cohen, P.H., "An Integrated CAD-CAM Approach for the Selection of Workholding Devices for Concentric, Rotational Components," 14th conference of the NSF Production Research and Technology Program, Society of Manufacturing Engineers, Dearborn, MI.
Bidanda, B., and Cohen, P.H., "Automated Fixture Selection for Rotational Parts," 3rd International Conference for CAD/CAM and Robotics, Elsevier Science Publishers.
Bidanda, B., and Cohen, P.H., "Development of a Computer Aided Fixture Selection System for Concentric, Rotational Parts," Symposium on Advances in Integrated Product Design and Manufacturing, pp. 219-226.
Bidanda, B., and Motavalli, S., "Building CAD Models with Non-Contact Techniques," IIE Conference, Atlanta, GA.
Bidanda, B., and Rubinovitz, J., "Use of a Computer Vision System to check for Spatter in Butt Welds," 22nd SES Annual Meeting.
Bidanda, B., and Wolfe, H., "An Analysis for Manufacturing System Laboratory Development," ASEE Conference, pp. 303-307, Portland, OR.
Bidanda, B., Cohen, P.H., and Schmidt, A.O., "Cellular Manufacturing for Small Shops," International Conference on Technology and Technology Exchange-ICTTE 1986.
Bidanda, B., Colosimo, R., and Petri, K., "On Improving Manufacturing Efficiency," the International Conference on Manufacturing Excellence: Mexcel 95, Bangalore, India.
Bidanda, B., Di Pasquale, J., Clune, J., and Creehan, K., "Rapid Prototyping & Reverse Engineering Applications in a BioMedical Environment," International Conference of Production Research, Limerick, Ireland.
Bidanda, B., Narayanan, V., Brahim, B.S., and Thorne, J., "On the Development of a Robotic Work Cell for Sanitary Ware Spray Glazing," XIII Conference in Computers and Industrial Engineering, Orlando, Florida.
Bidanda, B., Rajgopal, J., and Shuman, L., "Flexible Doctoral Programs for International Faculty," International Conference for Engineering Education, Rio de Janerio.
Bidanda, B., Sepideh, A., Shankar, M.R., and Basu, S., "Sustainable Design and Manufacturing by Mapping, Microstructure from Severe Shear Deformation in Machining," 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucharest.
Billo, R., Bidanda, B., and Peternel, J., "Parametric Design of Countersink Cutting Tools," the Second I.E. Research Conference, pp. 370-374, Los Angeles, CA.
Billo, R., Tate, D., and Bidanda, B., "Comparison of a Genetic Algorithm and Cluster Analysis for the Cell Formation Problem: A Case Study," the Third I.E. Research Conference, pp. 543-548, Atlanta, GA.
Billo, R.E., and Bidanda, B., "How to Implement ADC," the Automatic Identification & Data Capture Seminar, Pittsburgh, PA.
Billo, R.E., and Bidanda, B., "Modeling Effective Material Tracking Systems: A Case Study in Wireless Technology," Banff.
Cohen, Y., and Bidanda, B., "Y- Nets for Automated Production," the International Conference for Production Research (ICPR), Osaka.
Cohen, Y., and Bidanda, B., "Y-Nets: A New Technique for Modeling Discrete Control in Industrial Systems," the Sixth Industrial Engineering Research Conference, pp. 586-591, Miami Beach.
Colosimo, R., Needy, K., and Bidanda, B., "Worker Assignments in Implementing Manufacturing Cells," the Sixth Industrial Engineering Research Conference, pp. 240-245, Miami Beach.
Kadidal, M., and Bidanda, B., "A Castability Expert System," XV Conference in Computers and Industrial Engineering, Florida.
Narayanan, V., and Bidanda, B., "Analysis of Process Parameters for Robotic Spray Glazing," the Fourth I.E. Research Conference, Nashville, TN.
Rajgopal, J., Bidanda, B., and Shuman, L., "Flexible Doctoral Programs for International Faculty," International Conference on Engineering Education, Rio de Janerio.
http://www.engineering.pitt.edu/People/Faculty/SSOE/Active/Bidanda,-Bopaya/
M.S. in Science & Technology, Western Carolina University, 1983
B.S. in Electrical Engineering, National Institute of Technology (ex KREC - Surathkal, University of Mysore), 1976
Bidanda, B., and Redfern, M., "Development of a Microcomputer Based Slip Tester," To appear in Computers and Industrial Engineering Journal.
Hu, G., Wang, L., Chen, Y., and Bidanda, B., "An Oligopoly Model to Analyze the Market and Social Welfare for Green Manufacturing Industry," To appear in Journal of Cleaner Production.
Basu, S., and Bidanda, B., 2013, "Eco-efficient construction and building materials," in Shortcomings of eco-labelling of construction and building materials, E.A. Pacheco-Torgal, ed., Woodhead Publishing.
Bidanda, B., and Norman, B.A., 2012, "Enhancing Endoscope Reprocessing within the VA Health System," Industrial & Systems Engineering Research Conference, Orlando, Florida.
Desai, S., Bidanda, B., and Lovell, M., 2012, "Material and process Selection in product design using decision-making techniques (AHP)," European Journal on Industrial Engineering, no.3.
Wu, S., Shuman, L., Bidanda, B., Baleban, C., and Sochats, K., 2012, "A Hybrid Modeling Framework to Simulate Disaster Response Decisions," International Journal of Advanced Intelligence Paradigms, no.1.
Bidanda, B., Hu, G., Shankar, M.R., Abolghasem, S., and Basu, S., 2011, "Assessing the Environmental Footprint of Manufactured Products: A Survey of Current Literature," International Journal of Production Economics.
Bidanda, B., Hu, G., Wang, L.Z., and Chen, Y., 2011, "An Oligopoly Model to Analyze the Market and Social Welfare for Green Manufacturing Industry," International Conference on Production Research, Stuttgart.
Hu, G., Wang, L.Z., Chen, Y., and Bidanda, B., 2011, "An Oligopoly Model to Analyze the Market and Social Welfare for Green Manufacturing Industry," International Conference on Production Research, Stuttgart.
Arisoy, O., and Bidanda, B., 2009, "Strategic Decision Making in Global Supply Networks," in Strategic Information Systems, M.G. Hunter, ed..
Arisoy, O., Azim, M., and Bidanda, B., 2009, "Project Management in a Flat World Circa 2025," in Project Management Circa 2025, B. Bidanda, and D. Cleland, eds., Project Management Institute.
Cleland, D., and Bidanda, B., 2009, "PROJECT MANAGEMENT CIRCA 2025," Project Management Institute.
Gaussin, M., Hu, G., Shankar, R., and Bidanda, B., 2009, "Assessing the Environmental Footprint of Manufactured Products: A Survey of Current Literature," International Conference on Production Research, Shanghai.
Hu, G., and Bidanda, B., 2009, "A Product Upgrade Decision Model for Sustainable Manufacturing," Industrial Engineering Research Conference, Miami, Florida.
Hu, G., and Bidanda, B., 2009, "Modeling Sustainable Product Life Cycle Decision Support Systems," Int. J. Production Economics.
Hu, G., Wang, L., and Bidanda, B., 2009, "A Multi-objective Model for Project Portfolio Selection to Implement Lean and Six Sigma Concepts," International Journal of Production Research, no.23, pp. 6611-6625.
Hu, G., Wang, L., and Bidanda, B., 2009, "Sustainable Manufacturing and Project Management Circa 2025," in Project Management Circa 2025, B. Bidanda, and D. Cleland, eds., Project Management Institute.
Bidanda, B., and Bartolo, P., 2008, "VIRTUAL PROTOTYPING & BIO-MANUFACTURING IN MEDICAL APPLICATIONS," Springer Science Publishers.
Arisoy, O., and Bidanda, B., 2008, "Strategic Decision Making in Global Supply Networks," in Encyclopedia of Networked & Virtual Organizations, M.M. Cunha, and G.D. Putnik, eds., Information Science Reference, pp. 1509-1515.
Bunce, M., Wang, L., and Bidanda, B., 2008, "Leveraging Six Sigma with Industrial Engineering tools in Crateless Retort Production," International Journal of Production Research, pp. 6701-6719.
Dhawan, A., Srinivasan, S., Rajib, P., and Bidanda, B., 2008, "Minimizing total cost and regular and emergency sources: a neuro-dynamic programming approach," International Journal of Production Research.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., and Balaban, C., 2008, "Agent-based discrete event simulation modeling for disaster responses," J. Fowler, and S. Mason, eds., pp. 1908-13.
Wu, S., Shuman, L., Bidanda, B., Prokopyev, O., Kelley, M., Sochats, K., and Balaban, C., 2008, "Simulation-based decision support system for real-time disaster response management," J. Fowler, and S. Mason, eds., pp. 58-63.
Bartolo, P., and Bidanda, B., 2007, "BIO-MATERIALS AND PROTOTYPING APPLICATIONS IN MEDICINE," Springer Science Publishers.
Cohen, Y., Wang, M., and Bidanda, B., 2007, "Modeling and implementation of agent-based discrete industrial automation," in Innovative algorithms and techniques in automation, industrial electronics and telecommunications, K. Elleithy, M. Karim, A. Mahmood, and T. Sobh, eds., Springer, pp. 535-541.
Desai, S., Bidanda, B., and Bartolo, P., 2007, "Metallic and Ceramic Biomaterials: Current and Future Directions," in Bio Materials and Prototyping Applications in Medicine, P. Bartolo, and B. Bidanda, eds., Springer.
Hu, G., and Bidanda, B., 2007, "Modeling Sustainable Product Lifecycle Decision Support Systems," Chile.
Hu, G., Wang, L., and Bidanda, B., 2007, "Project Portfolio Selection for Implementing Lean and Six Sigma Concepts," Nashville.
Hu, G., Wang, L., Wang, Y., and Bidanda, B., 2007, "A New Model for Closed Loop Product Lifecycle Systems," Nashville.
Srinivasan, S., Jain, C., and Bidanda, B., 2007, "Software and Other Project Management Practices in India," in Project Manager's Handbook: Applying Best Practices across Global Industries, D. Cleland, and L.R. Ireland, eds., McGraw Hill.
Wang, L., Hu, G., and Bidanda, B., 2007, "A Game Theoretic Model of the Market Competition between Green and Ordinary Products," Proceedings of the 2007 Industrial Engineering Research Conference, Nashville.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., and Balaban, C., 2007, "Disaster policy optimization: A simulation based approach," pp. 872-877, Nashville.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., and Balaban, C., 2007, "Embedding GIS in disaster simulation," 27th Annual ESRI International User Conference.
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K.M., and Balaban, C., 2007, "Embedding GIS in disaster simulation."
Wu, S., Shuman, L.J., Bidanda, B., Kelley, M., Lawson, B., Sochats, K.M., and Balaban, C.D., 2007, "System implementation issues of Dynamic Discrete Disaster Decision Simulation System (D4S2) - Phase I," R.R. Barton, B. Biller, S.G. Henderson, M. Hsieh, J. Shortle, and J.D. Tew, eds., pp. 1127-34.
Bidanda, B., and Arisoy, O., 2006, "Project Management in an Outsourcing Environment," in The Global Project Management Handbook (2nd Edition), D. Cleland, and R. Gareis, eds..
Bidanda, B., Arisoy, O., and Shuman, L.J., 2006, "Colombia & the New Global Economy: Implications of Tratado de Libre Comercio for Colombian Industry, Engineers & Engineering Educators," Revista de ingenieria, pp. 83-90.
Bidanda, B., Arisoy, O., and Shuman, L.J., 2006, "Offshoring Manufacturing: Implications for engineering jobs and education: A survey and case study," Robotics and Computer Integrated Manufacturing, no.6.
Arisoy, O., Bidanda, B., and Shuman, L., 2006, "Multi-expert multi-criteria decision making in outsourcing," Orlando.
Arisoy, O., Gokhan, M., Needy, K.L., and Bidanda, B., 2006, "Activity Based Costing and Life Cycle Costing in Outsourcing Decision Analysis," Orlando.
Cohen, Y., Wang, M.E., and Bidanda, B., 2006, "Modeling and Implementation of Agent-Based Discrete Industrial Automation," International Conference on Industrial Electronics, Technology & Automation.
Creehan, K., and Bidanda, B., 2006, "Computer-Aided Reverse Engineering of the Human Musculo-skeletal system," Virtual & Physical Prototyping, no.2.
Hu, G., Wang, Y., and Bidanda, B., 2006, "PLM Systems for Network-centric manufacturing," Orlando.
Hu, G., Wang, Y., and Bidanda, B., 2006, "Product Life cycle management challenges in trans-national environments," Orlando.
Lai, J.P., Shuman, L.J., and Bidanda, B., 2006, "A Surrogate Approach to Simulation Optimization," Orlando.
Puthpongsiriporn, T., Porter, D.J., Bidanda, B., Wang, M.E., and Billo, R.E., 2006, "Attribute-Level Neighbor Hierarchy Construction Using evolved Pattern-based Knowledge Induction," IEEE Transactions on Knowledge and Data Engineering, no.7.
Bidanda, B., Arisoy, O., and Shuman, L., 2005, "Manufacturing Outsourcing: Implications for Engineering Jobs & Education," FAIM 2005 Conference, pp. 884-892, Bilbao, Spain.
Bidanda, B., Arisoy, O., and Shuman, L.J., 2005, "The New Global Economy: Implications for Manufacturing Engineers and Educators."
Bidanda, B., Ariyawongrat, P., Needy, K.L., Norman, B.A., and Tharmmaphornphilas, W., 2005, "Human Related Issues in Manufacturing Cell Design, Implementation, and Operation: A Review & Survey," International Journal of Computers & Industrial Engineering, no.48, pp. 507-523.
Bidanda, B., Shuman, L.J., Thomes, K., and Arisoy, O., 2005, "Adapting Engineering Coursework for Increased Global Relevance," Annual Conference of the American Society for Engineering Education, Salt Lake City.
Alrashdan, A., Motavalli, S., and Bidanda, B., 2005, "Creation of Surface Models for Re-engineering of Manufactured Parts," International Conference of Production Research, Italy.
Cohen, Y., Bidanda, B., and Rokach, L., 2005, "A New Technique for Modeling & Implementation of Agent-Based Discrete Industrial Automation," FAIM 2005 Conference, pp. 424-431, Bilbao, Spain.
Creehan, K., and Bidanda, B., 2005, "Computer Aided Reverse Engineering of Human Tissues," pp. 155-160.
Needy, K., Norman, B.N., Besterfield-Sacre, M.B., Rajgopal, J., and Bidanda, B., 2005, "Integration and Synthesis of the Industrial Engineering Curriculum via an Unstructured Problem Solving Course," Annual Conference of the American Society for Engineering Education, Salt Lake City.
Shuman, L.J., Bidanda, B., Thomes, K., and Feick, L., 2005, "The Global and Societal Challenge - An Innovative Approach to ABET Criterion 3.H. and beyond," Annual Conference of the American Society for Engineering Education, Salt Lake City.
Bidanda, B., and Bartolo, P., 2004, "Guest Editorial - Product Development," International Journal of Product Development, no.2.
Bidanda, B., and Desai, S., 2004, "Strategic planning models for prototyping and product development centers," International Journal of Product Development, no.2.
Norman, B.A., Besterfield-sacre, M.E., Bidanda, B., Needy, K.L., and Rajgopal, J., 2004, "A Conceptual Model for Integrating and Synthesizing the industrial engineering curriculum," American Society for Engineering Education Annual Conference, Salt Lake City.
Sunanta, O., and Bidanda, B., 2004, "A Comparison of Manual and Mechanical Lapping Methods on Valve Re-conditioning," Industrial Engineering Research Conference, Houston.
Bidanda, B., Desai, S., and Lovell, M., 2003, "The Business of Virtual and Rapid Prototyping," pp. 91-95.
Needy, K.L., Nachtmann, H., Roztocki, N., Warner, R.N., and Bidanda, B., 2003, "Implementing Activity Based Costing Systems in Small Manufacturing Firms: A Field Study," Engineering Management Journal, no.1, pp. 3-10.
Needy, K.L., Norman, B.A., Bidanda, B., Ariyawongrat, P., Tharmmaphornphilas, W., and Warner, R.C., 2002, "Assessing human capital: A lean manufacturing example," Engineering Management Journal, no.3, pp. 35-39.
Norman, B.A., Tharmmaphornphilas, W., Needy, K.L., Bidanda, B., and Warner, R.C., 2002, "Worker Assignment in cellular manufacturing considering technical and human skills," International Journal of Production Research, no.6, pp. 1479-1492.
Bidanda, B., Needy, K.L., and Norman, B.A., 2001, "Worker Assignment for cellular manufacturing considering technical, human, and lean skills," 2001 NSF Design, Service and Manufacturing Grantees and Research Conference, Tampa, FL.
Bidanda, B., Shuman, L.J., Rajgopal, J., Besterfield-sacre, M.E., and Rubial, C., 2001, "Flexible Doctoral Programs for International faculty: A Refined Model with preliminary results," International Conference for Engineering Education, Oslo.
Creehan, K., and Bopaya, B., 2001, "Computer Aided Reverse Engineering of Human Tissues and Structures," International Conference of Production Research, Prague.
Needy, K.L., Norman, B.A., Bidanda, B., Tharmmphornphilas, W., Aiyawongrat, P., and Warner, R.C., 2001, "Human Capital Assessment in Lean Manufacturing," American Society for Engineering Management Proceedings, pp. 233-239, Huntsville, AL.
Rafe, G.E., Needy, K.L., Bidanda, B., and Schmidt, T.A., 2001, "Delivering continuous manufacturing education and training via internet-based distributed virtual laboratories," 2001 Frontiers in Education Conference, Reno, NV.
Sunant, O., and Bidanda, B., 2001, "A Fuzzy Logic Advisory System for Flat Surface Lapping," International Conference of Production Research, Prague.
Bidanda, B., 2000, "Assembly Line Balancing," in Maynard Industrial Engineering Handbook, K. Zandin, ed., McGraw Hill.
Bidanda, B., Aguwa, C., and Nnaji, B., 2000, "A Manufacturing Modernization Model for Developing Countries," 5th USA-Africa Conference on Manufacturing Technology, Abuja, Nigeria.
Bidanda, B., Needy, K.L., and Norman, B.A., 2000, "Worker Assignment for cellular manufacturing considering human issues," 2000 NSF Design and Manufacturing Research Conference, Vancouver, British Columbia.
Bidanda, B., Needy, K.L., Norman, B.A., and Warner, R., 2000, "Skills and Cells," World Symposium GT-CM 2000, San Juan, Puerto Rico.
Billo, R.E., Bidanda, B., and Adickes, M., 2000, "Bar Codes and Other Data Collection Methods," in Maynard Industrial Engineering Handbook, K. Zandin, ed., McGraw Hill.
Carnahan, B., Warner, R.C., Bidanda, B., and Needy, K.L., 2000, "Predicted glass furnace output using statistical and neural computing methods," International Journal of Production Research, no.6, pp. 1255-1269.
Maitra, A., Bidanda, B., and Nnaji, B., 2000, "A Framework for Task Level Programming in Automated Storage and Retrieval Systems," 9th Industrial Engineering Research Conference, Cleveland, OH.
Needy, K.L., Bidanda, B., and Gulsen, M., 2000, "A model for the development, assessment, and validation of activity based costing systems for small manufacturers," Engineering Management Journal, no.1, pp. 31-38.
Needy, K.L., and Bidanda, B., 2000, "Production Flow Strategies," in Maynard Industrial Engineering Handbook, K. Zandin, ed., McGraw Hill.
Norman, B.A., Tharmmaphornphilas, W., Needy, K.L., Bidanda, B., and Warner, R.C., 2000, "Assigning workers to tasks considering technical and human skills," 9th Industrial Engineering Research Conference, Cleveland, OH.
Rafe, G., Needy, K.L., and Bidanda, B., 2000, "Motivations for a distributed virtual laboratory for continuous manufacturing education and training," 2000 American Society for Engineering Education Annual Conference, St. Louis, MO.
Bidanda, B., and Needy, K.L., 1999, "Development of an activity based costing system in your small company," Industrial Engineering Solutions '99 Conference, pp. 58-63, Phoenix, AZ.
Bidanda, B., Colosimo, R.L., Warner, P.J., and Billo, R.E., 1999, "Project Management & Implementation of Cellular Manufacturing," in Handbook of Cellular Manufacturing Systems, S. Irani, ed., John Wiley & Sons.
Rafe, G., Needy, K.L., and Bidanda, B., 1999, "Motivations for a distributed virtual laboratory for continuous manufacturing education and training," American Society for Engineering Education Annual Conference, Charlotte, NC.
Bidanda, B., Kadidal, M., and Billo, R., 1998, "Development of an Intelligent Castability and Cost Estimation System," International Journal of Production Research, no.2, pp. 547-568.
Billo, R.E., and Bidanda, B., 1998, "Part Family Identification: The Role of Engineering Databases," in Group Technology & Cellular Manufacturing: State-Of-The-Art Synthesis of Research and Practice, Kluwer Academic Publishers.
Cohen, Y., Bidanda, B., and Billo, R., 1998, "Accelerating the Generation of Work Measurement Standards through Automatic Speech Recognition: A Laboratory Study," International Journal of Production Research, no.10, pp. 2701-2715.
Petri, K., Billo, R., and Bidanda, B., 1998, "A Neural Network Process Model for Abrasive Flow Machining Operations," Journal of Manufacturing Systems, no.1, pp. 52-64.
Aguwa, C.C., Bidanda, B., and Nnaji, B.O., 1997, "Shared Manufacturing in Developing Countries: An African Perspective," The Fourth Africa-USA International Conference on Manufacturing Technology, Pittsburgh.
Billo, R.E., Bidanda, B., and Adickes, M., 1997, "Performance Testing of Hand-Held Scanners for 2D Barcode Symbologies," Factory Automation & Integrated Manufacturing (FAIM) Conference, York, U.K..
Bidanda, B., and Billo, R., 1996, "Parametric Design and NC Code Generation of Countersink Cutting Tools," International Journal of Computer Integrated Manufacturing, no.2, pp. 105-112.
Berardi, M., and Bidanda, B., 1996, "A Non-traditional Economic Justification Model for Advanced Technologies," the 5th Industrial Engineering Research Conference, Minneapolis, Minnesota.
Billo, R., Bidanda, B., and Tate, D., 1996, "A Genetic Cluster Algorithm for the Machine Component Grouping Problem," Journal of Intelligent Manufacturing, no.3, pp. 1-13.
Billo, R., Bidanda, B., Cohen, Y., Fei, C.Y., and Petri, K.L., 1996, "Performance Standards and Testing of Two-Dimensional Bar Code Systems for Overhead Scanning," Journal of Manufacturing Systems, no.5, pp. 305-315.
Billo, R., Needy, K., and Bidanda, B., 1996, "Challenges Facing Information Technologies to Support World Class Manufacturing Practices," Computers In Industry, pp. 163-165.
Cleland, D., Bidanda, B., and Chung, C., 1996, "Human Issues in Technology Implementation - Part 2," Industrial Management, no.5, pp. 15-16.
Cohen, Y., Bidanda, B., Billo, R.E., and Zandin, K.B., 1996, "On Integrating Work Measurement Systems with Voice Recognition Technologies," the 5th Industrial Engineering Research Conference, Minneapolis, Minnesota.
Cohen, Y., and Bidanda, B., 1996, "A Discrete Control Modeling Technique for Automated Industrial Systems," the Embedded Computing Conference, Paris.
Maitra, A., Bidanda, B., and Rubinovitz, J., 1996, "Need for the Development of a Generic Programming Interface for Industrial Robots," the SPIE Conference, pp. 89-95.
Wilhelm, M., Smith, A.E., and Bidanda, B., 1996, "Integrating an Expert System and a Neural Network for Process Planning," Engineering Design and Automation, no.4, pp. 259-269.
Wilhelm, M., Smith, A.E., and Bidanda, B., 1996, "Process Planning Using an Integrated Expert System and Neural Network Approach," in Hybrid Intelligent Systems Applications, J. Liebowitz, ed., Cognizant Communications/ISIS, pp. 3-23.
Bidanda, B., and Billo, R., 1995, "On the Use of Students for Developing Engineering Laboratories," Journal of Engineering Education, no.2, pp. 205-212.
Bidanda, B., and Billo, R.E., 1995, "On the Development of an Intelligent Speech-Based Work Measurement System," the 5th International FAIM Conference, Stuttgart, Germany.
Bidanda, B., and Needy, K.L., 1995, "Activity Based Costing for Small Manufacturers," the Fourth I.E. Research Conference, Nashville, TN.
Bidanda, B., Billo, R.E., and Cohen, Y., 1995, "A New Generation of Two Dimensional Bar Code Symbologies," the 13th International Conference on Production Research, Jerusalem.
Billo, R., and Bidanda, B., 1995, "Representing group technology classification and coding techniques with object oriented modeling," IIE Transactions, pp. 542-554.
Billo, R.E., Bidanda, B., and Kharbanda, P., 1995, "Re-Engineering Process Plans for Manufacturing Cell Design: A Case Study," the 13th International Conference on Production Research, Jerusalem.
Billo, R.E., and Bidanda, B., 1995, "Testing of Two-Dimensional Bar Code Systems for Overhead Sortation and Tracking," the Fourth I.E. Research Conference, Nashville, TN.
Burns, G., and Bidanda, B., 1995, "Modular Hierarchical Control Networks for the Specification and Implementation of Automated Manufacturing Control Systems," the Fourth I.E. Research Conference, Nashville, TN.
Cleland, D.I., Bidanda, B., and Chung, C., 1995, "Human Issues in Technology Implementation - Part 1," Industrial Management, no.4, pp. 22-27.
Cohen, Y., and Bidanda, B., 1995, "A New Generation of Work Measurement Systems for Manufacturing & Industrial Applications," the 13th International Conference on Production Research, Jerusalem.
Petri, K.L., Billo, R.E., and Bidanda, B., 1995, "The Development of Non-traditional Process Models for Extrusion Honing," the Fourth I.E. Research Conference, Nashville, TN.
Bidanda, B., and Hosni, Y., 1994, "Reverse Engineering and its Relevance to Industrial Engineering: A Critical Overview," Computers and Industrial Engineering Journal, no.2, pp. 343-348.
Bidanda, B., Narayanan, V., and Billo, R., 1994, "Reverse Engineering & Rapid Prototyping," in Handbook of Automation and Manufacturing Systems, R.C. Dorf, and A. Kusiak, eds., John Wiley & Sons.
Billo, R., Bidanda, B., and Kharbanda, P., 1994, "Re-Engineering Process Plans for Effective Manufacturing Cell Formation," International Journal of Manufacturing Systems Design, no.3, pp. 217-229.
Billo, R., Bidanda, B., and Peternel, J., 1994, "Enhancing Classification and Coding Techniques with Object Oriented Modeling for Group Technology Applications," the Third I.E. Research Conference, pp. 549-554, Atlanta, GA.
Billo, R., Bidanda, B., and Tate, D., 1994, "A Genetic Algorithm Formulation of the Cell Formation Problem," 16th Int. Conference on Computers and Industrial Engineering, Ashikaga, Japan.
Billo, R., and Bidanda, B., 1994, "A Student Advising System for Undergraduate Engineering Curricular Scheduling," Computers in Education, no.3, pp. 205-213.
Burns, G., and Bidanda, B., 1994, "An Iconic Programming System for Flexible Control of Automated Systems," ISRAM 1994, Maui.
Burns, G., and Bidanda, B., 1994, "An Integrated Petri Net Environment for Analysis and Logic Control of Manufacturing Systems," the Third I.E. Research Conference, Atlanta, GA.
Burns, G., and Bidanda, B., 1994, "The Use of Hierarchical Petri Nets for the Automatic Generation of Ladder Logic Programs," the ESD/IPC' 94 Conference & Exposition, pp. 169-179, Detroit, MI.
Dharwadkar, S., Bidanda, B., and Cleland, D., 1994, "Shared Manufacturing Assistance Center Project: A New Product Development," in THE GLOBAL PROJECT MANAGEMENT HANDBOOK, D. Cleland, and R. Gareis, eds., McGraw Hill.
Motavalli, S., and Bidanda, B., 1994, "Modular Software Development for Digitizing Data Analysis in Reverse Engineering," Computers and Industrial Engineering Journal, no.2, pp. 395-410.
Redfern, M., and Bidanda, B., 1994, "Slip Resistance of the Shoe-Floor Interface Under Bio-mechanically Relevant Conditions," Ergonomics, no.3, pp. 511-524.
Sergio, B., Smith, A., and Bidanda, B., 1994, "Reducing Waste in Casting with a Predictive Neural Model," Journal of Intelligent Manufacturing, pp. 277-286.
Bidanda, B., Billo, R., and Peternel, J., 1993, "Computer Aided Feature Based Design and NC Code Generation of Countersink Tools," the FAIM 1993 Conference, CRC Press, pp. 245-254, Limerick, Ireland.
Bidanda, B., Cleland, D., and Dharwadkar, S., 1993, "Shared Manufacturing: An Approach to Global Competitiveness," the FAIM 1993 Conference, CRC Press, pp. 55-66, Limerick, Ireland.
Bidanda, B., Cleland, D.I., and Dharwadkar, S., 1993, "SHARED MANUFACTURING SYSTEMS: A GLOBAL PERSPECTIVE," McGraw-Hill Book Company, New York.
Bidanda, B., Cohen, P.H., and Tunasar, C., 1993, "FIXPERT: A Rule Based System for Workholding Device Selection of Rotational Parts," in EXPERT SYSTEMS IN PRODUCTION & MANUFACTURE: STRUCTURE AND RULES, S. Anand, and A. Mital, eds., Chapman and Hall.
Bidanda, B., Rubinovitz, J., and Narayanan, V., 1993, "CAD-Based Interactive Off-line Programming of Spray Glazing Robots," International Journal of Computer Integrated Manufacturing, no.6, pp. 357-365.
Ben-Brahim, S., Smith, A., and Bidanda, B., 1993, "Relating Product Specifications and Performance Data with a Neural Network Model for Design Improvement," Journal of Intelligent Manufacturing, pp. 367-374.
Billo, R.E., and Bidanda, B., 1993, "The Start Up of an Automated Data Collection Laboratory," 4th Annual Automatic Identification Educators Conference, Philadelphia.
Burns, G., Rajgopal, J., and Bidanda, B., 1993, "Integrating Group Technology and TSP for Scheduling Operations with Sequence Dependent Setup Times," the Second I.E. Research Conference, pp. 837-841, Los Angeles, CA.
Narayanan, V., Bidanda, B., and Rubinovitz, J., 1993, "Off-Line Programming and Path Planning of Spray Glazing Robots," the XIII International Conference for Production Research (ICPR), Elsevier Science Publishers.
Rajgopal, J., and Bidanda, B., 1993, "On the Use of Statistical Design in Manufacturing Engineering Education," International Journal of Applied Engineering Education, no.4.
Smith, A., Martinez, S., and Bidanda, B., 1993, "A Neural Predictive Quality Model for Slip Casting Using Categorical Metrics," the Second I.E. Research Conference, pp. 265-269, Los Angeles, CA.
Bidanda, B., and Muralikrishnan, C.K., 1992, "Flexible Fixtures for Intelligent Manufacturing," in Intelligent Design and Manufacturing, A. Kusiak, ed., John Wiley & Sons.
Bidanda, B., Shuman, L., and Puerzer, R., 1992, "On Teaching CAD Concepts to Industrial Engineers," Engineering Design Graphics Journal, no.2, pp. 11-18.
Ben-Brahim, S., Smith, A., and Bidanda, B., 1992, "Estimating Product Performance and Quality from Design Parameters Via Neural Networks," the First I.E. Research Conference, Chicago, IL.
Cleland, D., Bidanda, B., and Dharwadkar, S., 1992, "A Shared Manufacturing Assistance Center Project," the Project Management Institute Seminar & Symposium, pp. 466-473, Pittsburgh, PA.
Motavalli, S., and Bidanda, B., 1992, "Modular Software Development for Reverse Engineering Applications," the First I.E. Research Conference, Chicago, IL.
Narayanan, V., Rubinovitz, J., and Bidanda, B., 1992, "On the Development of Computer Based Path Planning Strategies for Robotic Spray Glazing," Computers and Industrial Engineering Journal, pp. 15-18.
Bidanda, B., Motavalli, S., and Harding, K., 1991, "Reverse Engineering: An Evaluation of Prospective Non-Contact Technologies and Applications in Manufacturing Systems," International Journal of Computer Integrated Manufacturing, no.3, pp. 145-156.
Bidanda, B., Rubinovitz, J., and Narayanan, V., 1991, "Off-line Programming for Robotic Spray Glazing Cell," Fourth World Conference on Robotics Research, Pittsburgh, PA.
Bidanda, B., Shuman, L., and Puerzer, R., 1991, "On Teaching CAD Concepts to Industrial Engineers," the ASEE Conference, New Orleans.
Motavalli, S., and Bidanda, B., 1991, "Development of a Part Image Reconstruction System for Reverse Engineering of Design Modifications," Journal of Manufacturing Systems, no.5.
Rajgopal, J., and Bidanda, B., 1991, "On Scheduling Parallel Machines with Two Setup Classes," International Journal of Production Research, no.12, pp. 2443-2458.
Redfern, M., and Bidanda, B., 1991, "Programmable Shoe/Floor Tester to Evaluate Floor Slipperiness," in ADVANCES IN INDUSTRIAL ERGONOMICS AND SAFETY III, W. Karwowski, and J.W. Yates, eds., Taylor & Francis.
Bidanda, B., and Cleland, D.I., 1990, "THE AUTOMATED FACTORY HANDBOOK: TECHNOLOGY AND MANAGEMENT," Tab Professional and Reference Books, Blue Ridge Summit, PA.
Bidanda, B., and Motavalli, S., 1990, "On the Applications of Part Image Reconstruction Systems in Automated Manufacturing," 5th International conference on CAD/CAM, Robotics and Factories of the Future, Elsevier Science Publishers, Norfolk, Virginia.
Bidanda, B., and Rajgopal, J., 1990, "Optimal Selection of Workholding Devices for Rotational Parts," IIE Transactions, no.1.
Bidanda, B., Motavalli, S., and Patterson, G.P., 1990, "On the Development of a Computerized System for Cephalometric Analysis," Journal of Medical Systems, no.1.
Burhanuddin, S., and Bidanda, B., 1990, "Industrial Robots," in THE AUTOMATED FACTORY HANDBOOK; TECHNOLOGY AND MANAGEMENT, B. Bidanda, and D.I. Cleland, eds., Tab Professional and Reference Books (Division of McGraw-Hill), Blue Ridge Summit, PA.
Bidanda, B., and Cleland, D., 1989, "Techniques to Assess Project Feasibility," Project Management Journal, no.2.
Bidanda, B., and Motavalli, S., 1989, "Reverse Engineering using Structured Lighting," 4th International Conference on CAD/CAM, Robotics and Factories of the Future, Elsevier Science Publishers, Delhi, India.
Bidanda, B., Rubinovitz, J., and Raman, S., 1989, "Development of a Spatter Index for Automated Welding Inspection Using Computer Vision," Computers in Industrial Engineering Journal, no.2, pp. 215-224.
Knott, K., Bidanda, B., and Pennebaker, D., 1988, "The Economics of Robotic Welding," The International Journal of Production Research, no.1.
Bidanda, B., and Knott, K., 1987, "Roadblocks to Robotic Welding," Journal of Methods-Time Measurement.
Bidanda, B., "Designing and Implementing Large Scale Cellular Manufacturing Systems," Banff.
Bidanda, B., "Designing and Implementing Large Scale Cellular Manufacturing Systems," IIE Solutions Conference, Banff.
Bidanda, B., and Cohen, P.H., "An Integrated CAD-CAM Approach for the Selection of Workholding Devices for Concentric, Rotational Components," 14th conference of the NSF Production Research and Technology Program, Society of Manufacturing Engineers, Dearborn, MI.
Bidanda, B., and Cohen, P.H., "Automated Fixture Selection for Rotational Parts," 3rd International Conference for CAD/CAM and Robotics, Elsevier Science Publishers.
Bidanda, B., and Cohen, P.H., "Development of a Computer Aided Fixture Selection System for Concentric, Rotational Parts," Symposium on Advances in Integrated Product Design and Manufacturing, pp. 219-226.
Bidanda, B., and Motavalli, S., "Building CAD Models with Non-Contact Techniques," IIE Conference, Atlanta, GA.
Bidanda, B., and Rubinovitz, J., "Use of a Computer Vision System to check for Spatter in Butt Welds," 22nd SES Annual Meeting.
Bidanda, B., and Wolfe, H., "An Analysis for Manufacturing System Laboratory Development," ASEE Conference, pp. 303-307, Portland, OR.
Bidanda, B., Cohen, P.H., and Schmidt, A.O., "Cellular Manufacturing for Small Shops," International Conference on Technology and Technology Exchange-ICTTE 1986.
Bidanda, B., Colosimo, R., and Petri, K., "On Improving Manufacturing Efficiency," the International Conference on Manufacturing Excellence: Mexcel 95, Bangalore, India.
Bidanda, B., Di Pasquale, J., Clune, J., and Creehan, K., "Rapid Prototyping & Reverse Engineering Applications in a BioMedical Environment," International Conference of Production Research, Limerick, Ireland.
Bidanda, B., Narayanan, V., Brahim, B.S., and Thorne, J., "On the Development of a Robotic Work Cell for Sanitary Ware Spray Glazing," XIII Conference in Computers and Industrial Engineering, Orlando, Florida.
Bidanda, B., Rajgopal, J., and Shuman, L., "Flexible Doctoral Programs for International Faculty," International Conference for Engineering Education, Rio de Janerio.
Bidanda, B., Sepideh, A., Shankar, M.R., and Basu, S., "Sustainable Design and Manufacturing by Mapping, Microstructure from Severe Shear Deformation in Machining," 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucharest.
Billo, R., Bidanda, B., and Peternel, J., "Parametric Design of Countersink Cutting Tools," the Second I.E. Research Conference, pp. 370-374, Los Angeles, CA.
Billo, R., Tate, D., and Bidanda, B., "Comparison of a Genetic Algorithm and Cluster Analysis for the Cell Formation Problem: A Case Study," the Third I.E. Research Conference, pp. 543-548, Atlanta, GA.
Billo, R.E., and Bidanda, B., "How to Implement ADC," the Automatic Identification & Data Capture Seminar, Pittsburgh, PA.
Billo, R.E., and Bidanda, B., "Modeling Effective Material Tracking Systems: A Case Study in Wireless Technology," Banff.
Cohen, Y., and Bidanda, B., "Y- Nets for Automated Production," the International Conference for Production Research (ICPR), Osaka.
Cohen, Y., and Bidanda, B., "Y-Nets: A New Technique for Modeling Discrete Control in Industrial Systems," the Sixth Industrial Engineering Research Conference, pp. 586-591, Miami Beach.
Colosimo, R., Needy, K., and Bidanda, B., "Worker Assignments in Implementing Manufacturing Cells," the Sixth Industrial Engineering Research Conference, pp. 240-245, Miami Beach.
Kadidal, M., and Bidanda, B., "A Castability Expert System," XV Conference in Computers and Industrial Engineering, Florida.
Narayanan, V., and Bidanda, B., "Analysis of Process Parameters for Robotic Spray Glazing," the Fourth I.E. Research Conference, Nashville, TN.
Rajgopal, J., Bidanda, B., and Shuman, L., "Flexible Doctoral Programs for International Faculty," International Conference on Engineering Education, Rio de Janerio.
http://www.engineering.pitt.edu/People/Faculty/SSOE/Active/Bidanda,-Bopaya/
No comments:
Post a Comment