Wednesday, June 24, 2020

ISO Standards - Machine Tools and Related Issues



The following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 230-5:2000, Test code for machine tools — Part 5: Determination of the noise emission
ISO 447:1984, Machine tools — Direction of operation of controls
ISO 702 (all parts), Machine tools — Connecting dimensions of spindle noses and work holding chucks
ISO 841:2001, Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature
ISO 3744:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
ISO 3746:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
ISO 4413:2010, Hydraulic fluid power — General rules and safety requirements for systems and their components
ISO 4414:2010, Pneumatic fluid power — General rules and safety requirements for systems and their components
ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 6385:2004, Ergonomic principles in the design of work systems
ISO 8525:2008, Airborne noise emitted by machine tools — Operating conditions for metal-cutting machines
ISO 9241 (all parts), Ergonomics of human-system interaction
ISO 9355-1, Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
ISO 9355-2, Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
ISO 9355-3, Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
ISO 10218-2:2011, Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration
ISO 11161:2007+Amd.1:2010, Safety of machinery — Integrated manufacturing systems — Basic requirements
ISO 11202:2010, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11204:2010, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 11228 (all parts), Ergonomics — Manual handling
ISO/TR 11688-1:1995, Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning
ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 13849-2:2003, Safety of machinery — Safety-related parts of control systems — Part 2: Validation
ISO 13850:2006, Safety of machinery — Emergency stop — Principles for design
ISO 13851:2002, Safety of machinery — Two-hand control devices — Functional aspects and design principles
ISO 13854:1996, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 13855:2010, Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 13856-2:2005, Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars
ISO 13856-3:2013, Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO 13857:2008, Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 14118:2000, Safety of machinery — Prevention of unexpected start-up
ISO 14119:2013, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection
ISO 14120:2002, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards
ISO 14122-1:2001, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels
ISO 14122-2:2001, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 14122-3:2001, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 14122-4:2004, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 14159:2002, Safety of machinery — Hygiene requirements for the design of machinery
ISO 15534-1:2000, Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 15534-2:2000, Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 16156:2004, Machine-tools safety — Safety requirements for the design and construction of work holding chucks
IEC 60204-1:2009, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
IEC 60529, Degrees of protection provided by enclosures (IP Code)
IEC 60825-1:2007, Safety of laser products — Part 1: Equipment classification and requirements
IEC 61000-6-2:2005, Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments
IEC 61000-6-4:2011, Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments
IEC 61800-5-2:2007, Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional
EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 1837:1999+A1:2009, Safety of machinery — Integral lighting of machines


https://www.iso.org/obp/ui/#iso:std:iso:23125:ed-2:v2:en

3 comments:

  1. sertifikasi iso 9001 jakarta oleh IAS memastikan bahwa standar saat ini dari proses organisasi Anda memenuhi persyaratan minimum dari standar internasional, juga memastikan bahwa ia mampu memberikan produk / layanan berkualitas yang konsisten secara efektif kepada pelanggan dan meningkatkan produktivitas bisnis yang konstan. . Organisasi bersertifikat ISO 9001 dianggap sebagai yang paling terkenal di industri global. Merek dan citra organisasi akan ditingkatkan dengan mencapai QMS.

    ReplyDelete
  2. The Occupational Health and Safety Management System (OHSMS) defines a process to continuously improve your performance and at the same time comply with the law. Looking for ISO 45001 Internal Auditor Training ? Call +62-8111012541. IAS Indonesia is the Leading Provider of ISO 45001 training in Indonesia.

    ReplyDelete
  3. Thanks for sharing such a great blog Keep posting..
    iso training bangladesh

    ReplyDelete