Wednesday, August 8, 2012

Design and Production Process Project - Section B - 2012




Assignment Part of Introduction to Industrial Engineering - Industrial Engineering Concepts Course

Course Page and Course Handouts



Computer Science

R.No. 68
http://pratikd-nitie-ie.blogspot.in/2012/08/agile-scrum-implementation.html

R.No, 83
SPIRAL MODEL OF SOFTWARE DEVELOPMENT AND ENHANCEMENT
http://sagarbhore.blogspot.in/2012/07/spiral-model-of-software-enhancement.html

63 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Saket Wankhede
    Roll No. 84 and Roll NO. 118
    DESIGN OF PIPES

    http://saketwankhede.blogspot.in/2012/08/ie-product-manufacture.html

    ReplyDelete
  3. Dear Sir
    Please go through the link for my project done on 'Manufacturing of wire wound resistor'

    http://vikassakre5.blogspot.in/2012/08/a-report-on-wire-wound-resistor.html

    ReplyDelete
  4. Roll No -103
    Dear Sir
    Please go through the link for report ' Manufacturing of Wire Wound Resistor'

    http://vikassakre5.blogspot.in/2012/08/a-report-on-wire-wound-resistor.html

    ReplyDelete
  5. Mechanical Engineering

    Roll 65 Pranjal Dewangan
    Roll 90 Shantanu Mishra

    http://pranjal-dew42.blogspot.in/2012/08/industrial-engineering.html

    ReplyDelete
  6. R.No.73 & R.No.111
    http://rajdeepdas1986.blogspot.in/2012/08/design-and-manufacture-of-engineering.html

    ReplyDelete
  7. Roll No- 103

    Wire Wound Resistor Manufacturing

    http://vikassakre5.blogspot.in/2012/08/a-report-on-wire-wound-resistor.html

    ReplyDelete
  8. ROLL NO - 108

    Manufacturing of Spur Gear Using Powder Metallurgy

    http://nitie42.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  9. Roll No 64, Roll No 86
    http://pkm64pgdie42niitie.blogspot.in/2012/08/industrial-engineering-assignment.html

    ReplyDelete
  10. ROLL NO. 119
    MANUFACTURING OF JUNCTION TRANSISTORS
    http://rubyshah.blogspot.in/2012/08/engineering-assignment-on-product.html

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. PRASENJIT HOJAI-66
    SARVESH HIREMATH-88

    Title-Cable Construction & Manufacturing Process

    http://prasenjithojai.blogspot.in/2012/08/cable-construction-manufacturing-process.html

    ReplyDelete
  13. LOKANATH TRIPATHY-115

    Design and Production Process of CMOS( Complementary metal oxide Transistor) Fabrication
    http://lokanathtripathy.blogspot.com/2012/08/design-and-production-process-of-cmos.html

    ReplyDelete
  14. vaibhav jaijani
    roll no. 99
    http://spurgearpowder.blogspot.in/

    Manufacturing of Spur Gear Using Powder Metallurgy

    ReplyDelete
  15. Rahul Sarda 123
    Sagar Bhore 83
    Sachin Prasad 82

    http://sagarbhore.blogspot.in/2012/07/spiral-model-of-software-enhancement.html

    Designing of Spiral Model

    ReplyDelete
  16. Lokanath Tripathy(115)
    Satya Swarup(89)
    Sumeet Singh(98)
    http://satyaswarup12.blogspot.com/2012/08/design-and-production-process-of-cmos.html

    ReplyDelete
  17. Sumeet Kumar Singh (98)

    Design and Production Process of CMOS Fabrication
    http://sumeet-industrial-engineering-2012.blogspot.in/2012/08/ie-product-manufacture.html

    ReplyDelete
  18. Robin Jain

    Project Title: A Report On Wire Wound Resistor Manufacturing

    http://robinjain09.blogspot.com/2012/08/a-report-on-wire-wound.html

    ReplyDelete
  19. This comment has been removed by the author.

    ReplyDelete
  20. Gagan
    121
    Title: Design and Process of Steel Boom
    http://steelboom.blogspot.in/2012/08/design-process-of-steel-bloom.html

    ReplyDelete
  21. Sachin kheveria Roll No. 81
    Title:Design and Manufacturing of Leaf Spring
    http://sachinkhevariadesign.blogspot.in/2012/08/design-and-manufacturing-of-leaf-spring_12.html

    ReplyDelete
  22. sudhanshu nagarkoti(113)
    Production of screw threads by Machining
    http://sudhanshuproductmanufacturing.blogspot.in/

    ReplyDelete
  23. SARVESH HIREMATH-88
    PRASENJIT HOJAI-66
    http://sarveshie.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  24. Reenu Yadav-78
    http://reenu-nitie-ie.blogspot.in/2012/08/agile-scrum-implementation.html

    ReplyDelete
  25. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  26. SHIVAM MARTOLIA- 114 and akash dutta 124
    ASSIGNMENT ON DESIGN OF WASHER
    http://shivammartolia.blogspot.in/

    ReplyDelete
  27. Harshal Chawda 110
    http://ieharshal.blogspot.in/2012/08/design-of-enterprise-resource-planning.html

    ReplyDelete
  28. Rupesh Kumar Chauhan
    Roll No :79
    Design and Manufacturing of Leaf Spring
    http://rupeshnitiedesign.blogspot.in/2012/08/design-and-manufacturing-of-leaf-spring_12.html

    ReplyDelete
  29. Ravi Kumar Lakra
    Roll No. 77
    Design and Process of Steel Bloom
    http://ravilakrapgdie42.blogspot.in/2012/08/design-process-of-steel-bloom_12.html

    ReplyDelete
  30. This comment has been removed by the author.

    ReplyDelete
  31. Akash Dutta
    Roll No-124
    Design Of Washer
    http://akashnitiepgdie42.blogspot.in/

    ReplyDelete
    Replies
    1. For the design study,please visit
      http://shivammartolia.blogspot.in/

      Delete
  32. Shenbagamoorthy.M
    Roll No 91
    Shankara Bellana
    Design of Chain drive
    http://shenbagamoorthyie42.blogspot.in/2012/08/design-of-chain-drives.html

    ReplyDelete
  33. Sachin Jaynt
    Roll No: 80
    Vaishali Gurjer
    Roll No: 100
    Design of Heat exchanger
    http://vaishali-ie42.blogspot.in/2012/08/design-ofheat-exchanger-group.html

    ReplyDelete
  34. JITENDRA NAYAK
    ROLL NO-118
    http://jitendranayak118.blogspot.in/2012/08/component-design.html

    ReplyDelete
  35. Snehal Wankhade
    Roll No: 96
    Design of Capacitor
    http://snehaldw.blogspot.in/2012/08/component-design-capacitor.html

    ReplyDelete
  36. Raunak Goyal-76
    Assignment on Product Manufacture:- Inventory Management System
    http://raunakgoyalie.blogspot.in/2012/08/assignment-on-product-manufacture.html

    ReplyDelete
  37. Prachi Agrawal
    Roll No. 61
    Design Of Shafts

    http://prachi-ie-42.blogspot.in/2012/08/shaft-introduction-ashaft-is-rotating.html

    ReplyDelete
  38. K. Ratnakar Reddy
    Roll no 112
    Test-driven development (TDD) of software systems

    http://ratnakarreddyk.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  39. Sakshi Gupta 85
    Reeti Pal 106
    Design of Magnetic Tape
    http://sakshiguptaindustrialengineering.blogspot.in/2012/08/design-component.html

    ReplyDelete
  40. shruti Rastogi
    Roll no.-94
    http://shrutirastogitransformer.blogspot.in/

    ReplyDelete
  41. Yogesh Bhondekar
    Roll No: 105
    Topic: Test-driven development (TDD) of software systems
    Link: http://bhondekaryb.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  42. Rakesh Dhande
    Roll no: 74
    Topic: Design and analysis of shaft
    http://dhanderakesh.blogspot.in/2012/08/national-institute-ofindustrial.html#!/2012/08/national-institute-ofindustrial.html

    ReplyDelete
  43. Ashwani Kr. Verma Roll No. 109
    Design of prestress members
    http://ashwanikrverma.blogspot.in/2012/08/ie-design-problem.html

    ReplyDelete
  44. Rahul Sen-72
    Assignment on Product Manufacture:-Inventory Management System
    http://rahulie.blogspot.in/p/assignment-on-product-manufacture.html

    ReplyDelete
  45. Dear Sir,
    I am Rahul Awadhiya
    Roll No. 71

    http://rahulawadhiyaie42.blogspot.in/2012/08/design-and-production-process-project.html

    ReplyDelete
  46. Sir,
    I am Pratik Dhariwal
    Roll no.67
    http://www.blogger.com/blogger.g?blogID=8971110844255365794#editor/target=post;postID=4557028472856346766

    ReplyDelete
  47. Sir,
    Shivangi Goyal
    Roll no 93
    http://www.blogger.com/blogger.g?blogID=8335017985237982097#editor/target=post;postID=6614247014213709765

    ReplyDelete
  48. Sir,
    Samay Singh Meena
    Roll No.- 86
    Design of Connecting rod for an Automobile industry
    http://ssmie.blogspot.in/2012/08/industrial-engineering-assignment.html


    ReplyDelete
  49. Sir,
    Venkata Karthik Menti
    Roll No: 102
    Design and manufacture of Transformer Core Laminations
    http://shrutirastogitransformer.blogspot.in/2012/08/design-and-manufacture-of-transformers.html

    ReplyDelete
  50. Sir,

    Priyamvid Rajak
    ROll No: 70

    Design of Customer Relationship Management

    http://priyamvid.blogspot.in/2012/08/design-of-customer-relationship.html#!/2012/08/design-of-customer-relationship.html

    ReplyDelete
  51. Name Roll No.
    Shubham garg 95
    Harshada pophali 116

    http://shubhamgarg310.blogspot.com/2012/08/the-fundamentals-of-current-sense.html

    ReplyDelete
  52. Varun Mitra 110
    http://ievarunmitra.blogspot.in/2012/08/product-development.html

    ReplyDelete
  53. Ratika Kapoor
    Roll No 75

    Test-driven development (TDD) of software systems

    http://ratikakapoor.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  54. VIKAS YADAV_104
    RAKESH DHANDE_74
    http://dhanderakesh.blogspot.in/2012/08/national-institute-ofindustrial.html#!/2012/08/national-institute-ofindustrial.html

    ReplyDelete
  55. PRADEEP KUMAR DUBEY (ROLL NO.-62)

    PRAMOD C NAIR

    http://pradeepddubey.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  56. Srajan Shrivastava (Roll No. 97)

    http://srajanshrivastava26.blogspot.in/2012/09/industrial-engineering-assignment.html

    ReplyDelete
  57. Pramod Nair
    Roll no-63

    Title:Design & Mfg of Ball Bearing

    http://pramodie42.blogspot.in/2012/09/national-institute-of-industrial.html

    ReplyDelete
  58. Pratik Desai
    Roll no : 68

    Title : Agile (Scrum) Implementation (Software)

    http://pratikd-nitie-ie.blogspot.in/2012/08/agile-scrum-implementation.html

    PS - > Sorry for delay in posting here. I had posted the link on your blog at the following location before the deadline.
    http://nraoiekc.blogspot.in/2012/08/introduction-to-industrial-engineering.html

    ReplyDelete
  59. Sagar Bhore
    R.No, 83
    SPIRAL MODEL OF SOFTWARE DEVELOPMENT AND ENHANCEMENT
    http://sagarbhore.blogspot.in/2012/07/spiral-model-of-software-enhancement.html

    ReplyDelete
  60. Shenbagamoorthy M
    Roll No 91
    PGDIE 42 Sec B
    Dear sir,
    As per our discusiion i am updating the new link.Thank you
    http://shenbagamoorthypgdie42.blogspot.in/2012/10/ie-design-paper.html

    ReplyDelete
  61. Sir i have posted the link earlier but it was broken link , kindly accept the new link and plz review the paper

    Regards
    Shivangi goyal

    ReplyDelete