Thursday, June 4, 2020

Design and Production Process Project - Section B - 2012




Assignment Part of Introduction to Industrial Engineering - Industrial Engineering Concepts Course

Course Page and Course Handouts



Computer Science

R.No. 68
http://pratikd-nitie-ie.blogspot.in/2012/08/agile-scrum-implementation.html

R.No, 83
SPIRAL MODEL OF SOFTWARE DEVELOPMENT AND ENHANCEMENT
http://sagarbhore.blogspot.in/2012/07/spiral-model-of-software-enhancement.html



Saket Wankhede
Roll No. 84 and Roll NO. 118
DESIGN OF PIPES

http://saketwankhede.blogspot.com/2012/08/ie-product-manufacture.html



 'Manufacturing of wire wound resistor'

http://vikassakre5.blogspot.com/2012/08/a-report-on-wire-wound-resistor.html




Roll No -103
Dear Sir
' Manufacturing of Wire Wound Resistor'

http://vikassakre5.blogspot.com/2012/08/a-report-on-wire-wound-resistor.html





Roll 65 Pranjal Dewangan
Roll 90 Shantanu Mishra

http://pranjal-dew42.blogspot.com/2012/08/industrial-engineering.html



Rajdeep
R.No.73 & R.No.111
http://rajdeepdas1986.blogspot.com/2012/08/design-and-manufacture-of-engineering.html




Roll No- 103

Wire Wound Resistor Manufacturing

http://vikassakre5.blogspot.com/2012/08/a-report-on-wire-wound-resistor.html




ROLL NO - 108

Manufacturing of Spur Gear Using Powder Metallurgy

http://nitie42.blogspot.com/2012/08/national-institute-of-industrial.html




Roll No 64, Roll No 86
http://pkm64pgdie42niitie.blogspot.com/2012/08/industrial-engineering-assignment.html



Ruby ShahA
ROLL NO. 119
MANUFACTURING OF JUNCTION TRANSISTORS
http://rubyshah.blogspot.com/2012/08/engineering-assignment-on-product.html







PRASENJIT HOJAIAugust 11, 2012 at 5:20 PM
PRASENJIT HOJAI-66
SARVESH HIREMATH-88

Title-Cable Construction & Manufacturing Process

http://prasenjithojai.blogspot.com/2012/08/cable-construction-manufacturing-process.html




LOKANATH TRIPATHY-115

Design and Production Process of CMOS( Complementary metal oxide Transistor) Fabrication
http://lokanathtripathy.blogspot.com/2012/08/design-and-production-process-of-cmos.html




vaibhav jaijani
roll no. 99
http://spurgearpowder.blogspot.com/

Manufacturing of Spur Gear Using Powder Metallurgy




Rahul Sarda 123
Sagar Bhore 83
Sachin Prasad 82

http://sagarbhore.blogspot.com/2012/07/spiral-model-of-software-enhancement.html

Designing of Spiral Model




Lokanath Tripathy(115)
Satya Swarup(89)
Sumeet Singh(98)
http://satyaswarup12.blogspot.com/2012/08/design-and-production-process-of-cmos.html




Sumeet Kumar Singh (98)
Design and Production Process of CMOS Fabrication
http://sumeet-industrial-engineering-2012.blogspot.com/2012/08/ie-product-manufacture.html




Robin Jain

Project Title: A Report On Wire Wound Resistor Manufacturing

http://robinjain09.blogspot.com/2012/08/a-report-on-wire-wound.html








121
Title: Design and Process of Steel Boom
http://steelboom.blogspot.com/2012/08/design-process-of-steel-bloom.html




Sachin kheveria Roll No. 81
Title:Design and Manufacturing of Leaf Spring
http://sachinkhevariadesign.blogspot.com/2012/08/design-and-manufacturing-of-leaf-spring_12.html




sudhanshu nagarkoti(113)
Production of screw threads by Machining
http://sudhanshuproductmanufacturing.blogspot.com/




SARVESH HIREMATH-88
PRASENJIT HOJAI-66
http://sarveshie.blogspot.com/2012/08/national-institute-of-industrial.html




Reenu Yadav-78
http://reenu-nitie-ie.blogspot.com/2012/08/agile-scrum-implementation.html








SHIVAM MARTOLIA- 114 and akash dutta 124
ASSIGNMENT ON DESIGN OF WASHER
http://shivammartolia.blogspot.com/




Harshal Chawda 110
http://ieharshal.blogspot.com/2012/08/design-of-enterprise-resource-planning.html




Rupesh Kumar Chauhan
Roll No :79
Design and Manufacturing of Leaf Spring
http://rupeshnitiedesign.blogspot.com/2012/08/design-and-manufacturing-of-leaf-spring_12.html




Ravi Kumar Lakra
Roll No. 77
Design and Process of Steel Bloom
http://ravilakrapgdie42.blogspot.com/2012/08/design-process-of-steel-bloom_12.html







Akash Dutta
Roll No-124
Design Of Washer
http://akashnitiepgdie42.blogspot.com/





For the design study,please visit
http://shivammartolia.blogspot.com/




Shenbagamoorthy.M
Roll No 91
Shankara Bellana
Design of Chain drive
http://shenbagamoorthyie42.blogspot.com/2012/08/design-of-chain-drives.html




Sachin Jaynt
Roll No: 80
Vaishali Gurjer
Roll No: 100
Design of Heat exchanger
http://vaishali-ie42.blogspot.com/2012/08/design-ofheat-exchanger-group.html




JITENDRA NAYAK
ROLL NO-118
http://jitendranayak118.blogspot.com/2012/08/component-design.html




Snehal Wankhade
Roll No: 96
Design of Capacitor
http://snehaldw.blogspot.com/2012/08/component-design-capacitor.html




Raunak Goyal-76
Assignment on Product Manufacture:- Inventory Management System
http://raunakgoyalie.blogspot.com/2012/08/assignment-on-product-manufacture.html




Prachi Agrawal
Roll No. 61
Design Of Shafts

http://prachi-ie-42.blogspot.com/2012/08/shaft-introduction-ashaft-is-rotating.html




K. Ratnakar Reddy
Roll no 112
Test-driven development (TDD) of software systems

http://ratnakarreddyk.blogspot.com/2012/08/national-institute-of-industrial.html




Sakshi Gupta 85
Reeti Pal 106
Design of Magnetic Tape
http://sakshiguptaindustrialengineering.blogspot.com/2012/08/design-component.html




shruti Rastogi
Roll no.-94
http://shrutirastogitransformer.blogspot.com/




Yogesh Bhondekar
Roll No: 105
Topic: Test-driven development (TDD) of software systems
Link: http://bhondekaryb.blogspot.com/2012/08/national-institute-of-industrial.html




Rakesh Dhande
Roll no: 74
Topic: Design and analysis of shaft
http://dhanderakesh.blogspot.com/2012/08/national-institute-ofindustrial.html#!/2012/08/national-institute-ofindustrial.html




Ashwani Kr. Verma Roll No. 109
Design of prestress members
http://ashwanikrverma.blogspot.com/2012/08/ie-design-problem.html




Rahul Sen-72
Assignment on Product Manufacture:-Inventory Management System
http://rahulie.blogspot.com/p/assignment-on-product-manufacture.html




Rahul Awadhiya
Roll No. 71

http://rahulawadhiyaie42.blogspot.com/2012/08/design-and-production-process-project.html




I am Pratik Dhariwal
Roll no.67
http://www.blogger.com/blogger.g?blogID=8971110844255365794#editor/target=post;postID=4557028472856346766




Shivangi Goyal
Roll no 93
http://www.blogger.com/blogger.g?blogID=8335017985237982097#editor/target=post;postID=6614247014213709765




Samay Singh Meena
Roll No.- 86
Design of Connecting rod for an Automobile industry
http://ssmie.blogspot.com/2012/08/industrial-engineering-assignment.html






Venkata Karthik Menti
Roll No: 102
Design and manufacture of Transformer Core Laminations
http://shrutirastogitransformer.blogspot.com/2012/08/design-and-manufacture-of-transformers.html





Priyamvid Rajak
ROll No: 70

Design of Customer Relationship Management

http://priyamvid.blogspot.com/2012/08/design-of-customer-relationship.html#!/2012/08/design-of-customer-relationship.html




Name Roll No.
Shubham garg 95
Harshada pophali 116

http://shubhamgarg310.blogspot.com/2012/08/the-fundamentals-of-current-sense.html




Varun Mitra 110
http://ievarunmitra.blogspot.com/2012/08/product-development.html




Ratika Kapoor
Roll No 75

Test-driven development (TDD) of software systems

http://ratikakapoor.blogspot.com/2012/08/national-institute-of-industrial.html




VIKAS YADAV_104
RAKESH DHANDE_74
http://dhanderakesh.blogspot.com/2012/08/national-institute-ofindustrial.html#!/2012/08/national-institute-ofindustrial.html




PRADEEP KUMAR DUBEY (ROLL NO.-62)

PRAMOD C NAIR

http://pradeepddubey.blogspot.com/2012/08/national-institute-of-industrial.html




Srajan Shrivastava (Roll No. 97)

http://srajanshrivastava26.blogspot.com/2012/09/industrial-engineering-assignment.html




Pramod Nair
Roll no-63

Title:Design & Mfg of Ball Bearing

http://pramodie42.blogspot.com/2012/09/national-institute-of-industrial.html




Pratik Desai
Roll no : 68

Title : Agile (Scrum) Implementation (Software)

http://pratikd-nitie-ie.blogspot.com/2012/08/agile-scrum-implementation.html






Sagar Bhore
R.No, 83
SPIRAL MODEL OF SOFTWARE DEVELOPMENT AND ENHANCEMENT
http://sagarbhore.blogspot.com/2012/07/spiral-model-of-software-enhancement.html




Shenbagamoorthy M
Roll No 91
PGDIE 42 Sec B

http://shenbagamoorthypgdie42.blogspot.com/2012/10/ie-design-paper.html


Updated on 5 June 2020, 8 August 2012


72 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Saket Wankhede
    Roll No. 84 and Roll NO. 118
    DESIGN OF PIPES

    http://saketwankhede.blogspot.in/2012/08/ie-product-manufacture.html

    ReplyDelete
  3. Dear Sir
    Please go through the link for my project done on 'Manufacturing of wire wound resistor'

    http://vikassakre5.blogspot.in/2012/08/a-report-on-wire-wound-resistor.html

    ReplyDelete
  4. Roll No -103
    Dear Sir
    Please go through the link for report ' Manufacturing of Wire Wound Resistor'

    http://vikassakre5.blogspot.in/2012/08/a-report-on-wire-wound-resistor.html

    ReplyDelete
  5. Mechanical Engineering

    Roll 65 Pranjal Dewangan
    Roll 90 Shantanu Mishra

    http://pranjal-dew42.blogspot.in/2012/08/industrial-engineering.html

    ReplyDelete
  6. R.No.73 & R.No.111
    http://rajdeepdas1986.blogspot.in/2012/08/design-and-manufacture-of-engineering.html

    ReplyDelete
  7. Roll No- 103

    Wire Wound Resistor Manufacturing

    http://vikassakre5.blogspot.in/2012/08/a-report-on-wire-wound-resistor.html

    ReplyDelete
  8. ROLL NO - 108

    Manufacturing of Spur Gear Using Powder Metallurgy

    http://nitie42.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  9. Roll No 64, Roll No 86
    http://pkm64pgdie42niitie.blogspot.in/2012/08/industrial-engineering-assignment.html

    ReplyDelete
  10. ROLL NO. 119
    MANUFACTURING OF JUNCTION TRANSISTORS
    http://rubyshah.blogspot.in/2012/08/engineering-assignment-on-product.html

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. PRASENJIT HOJAI-66
    SARVESH HIREMATH-88

    Title-Cable Construction & Manufacturing Process

    http://prasenjithojai.blogspot.in/2012/08/cable-construction-manufacturing-process.html

    ReplyDelete
  13. LOKANATH TRIPATHY-115

    Design and Production Process of CMOS( Complementary metal oxide Transistor) Fabrication
    http://lokanathtripathy.blogspot.com/2012/08/design-and-production-process-of-cmos.html

    ReplyDelete
  14. vaibhav jaijani
    roll no. 99
    http://spurgearpowder.blogspot.in/

    Manufacturing of Spur Gear Using Powder Metallurgy

    ReplyDelete
  15. Rahul Sarda 123
    Sagar Bhore 83
    Sachin Prasad 82

    http://sagarbhore.blogspot.in/2012/07/spiral-model-of-software-enhancement.html

    Designing of Spiral Model

    ReplyDelete
  16. Lokanath Tripathy(115)
    Satya Swarup(89)
    Sumeet Singh(98)
    http://satyaswarup12.blogspot.com/2012/08/design-and-production-process-of-cmos.html

    ReplyDelete
  17. Robin Jain

    Project Title: A Report On Wire Wound Resistor Manufacturing

    http://robinjain09.blogspot.com/2012/08/a-report-on-wire-wound.html

    ReplyDelete
  18. This comment has been removed by the author.

    ReplyDelete
  19. Gagan
    121
    Title: Design and Process of Steel Boom
    http://steelboom.blogspot.in/2012/08/design-process-of-steel-bloom.html

    ReplyDelete
  20. Sachin kheveria Roll No. 81
    Title:Design and Manufacturing of Leaf Spring
    http://sachinkhevariadesign.blogspot.in/2012/08/design-and-manufacturing-of-leaf-spring_12.html

    ReplyDelete
  21. sudhanshu nagarkoti(113)
    Production of screw threads by Machining
    http://sudhanshuproductmanufacturing.blogspot.in/

    ReplyDelete
  22. SARVESH HIREMATH-88
    PRASENJIT HOJAI-66
    http://sarveshie.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  23. Reenu Yadav-78
    http://reenu-nitie-ie.blogspot.in/2012/08/agile-scrum-implementation.html

    ReplyDelete
  24. This comment has been removed by the author.

    ReplyDelete
  25. SHIVAM MARTOLIA- 114 and akash dutta 124
    ASSIGNMENT ON DESIGN OF WASHER
    http://shivammartolia.blogspot.in/

    ReplyDelete
  26. Harshal Chawda 110
    http://ieharshal.blogspot.in/2012/08/design-of-enterprise-resource-planning.html

    ReplyDelete
  27. Rupesh Kumar Chauhan
    Roll No :79
    Design and Manufacturing of Leaf Spring
    http://rupeshnitiedesign.blogspot.in/2012/08/design-and-manufacturing-of-leaf-spring_12.html

    ReplyDelete
  28. Ravi Kumar Lakra
    Roll No. 77
    Design and Process of Steel Bloom
    http://ravilakrapgdie42.blogspot.in/2012/08/design-process-of-steel-bloom_12.html

    ReplyDelete
  29. This comment has been removed by the author.

    ReplyDelete
  30. Akash Dutta
    Roll No-124
    Design Of Washer
    http://akashnitiepgdie42.blogspot.in/

    ReplyDelete
    Replies
    1. For the design study,please visit
      http://shivammartolia.blogspot.in/

      Delete
  31. Shenbagamoorthy.M
    Roll No 91
    Shankara Bellana
    Design of Chain drive
    http://shenbagamoorthyie42.blogspot.in/2012/08/design-of-chain-drives.html

    ReplyDelete
  32. Sachin Jaynt
    Roll No: 80
    Vaishali Gurjer
    Roll No: 100
    Design of Heat exchanger
    http://vaishali-ie42.blogspot.in/2012/08/design-ofheat-exchanger-group.html

    ReplyDelete
  33. JITENDRA NAYAK
    ROLL NO-118
    http://jitendranayak118.blogspot.in/2012/08/component-design.html

    ReplyDelete
  34. Snehal Wankhade
    Roll No: 96
    Design of Capacitor
    http://snehaldw.blogspot.in/2012/08/component-design-capacitor.html

    ReplyDelete
  35. Raunak Goyal-76
    Assignment on Product Manufacture:- Inventory Management System
    http://raunakgoyalie.blogspot.in/2012/08/assignment-on-product-manufacture.html

    ReplyDelete
  36. Prachi Agrawal
    Roll No. 61
    Design Of Shafts

    http://prachi-ie-42.blogspot.in/2012/08/shaft-introduction-ashaft-is-rotating.html

    ReplyDelete
  37. K. Ratnakar Reddy
    Roll no 112
    Test-driven development (TDD) of software systems

    http://ratnakarreddyk.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  38. Sakshi Gupta 85
    Reeti Pal 106
    Design of Magnetic Tape
    http://sakshiguptaindustrialengineering.blogspot.in/2012/08/design-component.html

    ReplyDelete
  39. shruti Rastogi
    Roll no.-94
    http://shrutirastogitransformer.blogspot.in/

    ReplyDelete
  40. Yogesh Bhondekar
    Roll No: 105
    Topic: Test-driven development (TDD) of software systems
    Link: http://bhondekaryb.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  41. Rakesh Dhande
    Roll no: 74
    Topic: Design and analysis of shaft
    http://dhanderakesh.blogspot.in/2012/08/national-institute-ofindustrial.html#!/2012/08/national-institute-ofindustrial.html

    ReplyDelete
  42. Ashwani Kr. Verma Roll No. 109
    Design of prestress members
    http://ashwanikrverma.blogspot.in/2012/08/ie-design-problem.html

    ReplyDelete
  43. Rahul Sen-72
    Assignment on Product Manufacture:-Inventory Management System
    http://rahulie.blogspot.in/p/assignment-on-product-manufacture.html

    ReplyDelete
  44. Dear Sir,
    I am Rahul Awadhiya
    Roll No. 71

    http://rahulawadhiyaie42.blogspot.in/2012/08/design-and-production-process-project.html

    ReplyDelete
  45. Sir,
    I am Pratik Dhariwal
    Roll no.67
    http://www.blogger.com/blogger.g?blogID=8971110844255365794#editor/target=post;postID=4557028472856346766

    ReplyDelete
  46. Sir,
    Shivangi Goyal
    Roll no 93
    http://www.blogger.com/blogger.g?blogID=8335017985237982097#editor/target=post;postID=6614247014213709765

    ReplyDelete
  47. Sir,
    Samay Singh Meena
    Roll No.- 86
    Design of Connecting rod for an Automobile industry
    http://ssmie.blogspot.in/2012/08/industrial-engineering-assignment.html


    ReplyDelete
  48. Sir,
    Venkata Karthik Menti
    Roll No: 102
    Design and manufacture of Transformer Core Laminations
    http://shrutirastogitransformer.blogspot.in/2012/08/design-and-manufacture-of-transformers.html

    ReplyDelete
  49. Sir,

    Priyamvid Rajak
    ROll No: 70

    Design of Customer Relationship Management

    http://priyamvid.blogspot.in/2012/08/design-of-customer-relationship.html#!/2012/08/design-of-customer-relationship.html

    ReplyDelete
  50. Name Roll No.
    Shubham garg 95
    Harshada pophali 116

    http://shubhamgarg310.blogspot.com/2012/08/the-fundamentals-of-current-sense.html

    ReplyDelete
  51. Varun Mitra 110
    http://ievarunmitra.blogspot.in/2012/08/product-development.html

    ReplyDelete
  52. Ratika Kapoor
    Roll No 75

    Test-driven development (TDD) of software systems

    http://ratikakapoor.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  53. VIKAS YADAV_104
    RAKESH DHANDE_74
    http://dhanderakesh.blogspot.in/2012/08/national-institute-ofindustrial.html#!/2012/08/national-institute-ofindustrial.html

    ReplyDelete
  54. PRADEEP KUMAR DUBEY (ROLL NO.-62)

    PRAMOD C NAIR

    http://pradeepddubey.blogspot.in/2012/08/national-institute-of-industrial.html

    ReplyDelete
  55. Srajan Shrivastava (Roll No. 97)

    http://srajanshrivastava26.blogspot.in/2012/09/industrial-engineering-assignment.html

    ReplyDelete
  56. Pramod Nair
    Roll no-63

    Title:Design & Mfg of Ball Bearing

    http://pramodie42.blogspot.in/2012/09/national-institute-of-industrial.html

    ReplyDelete
  57. Pratik Desai
    Roll no : 68

    Title : Agile (Scrum) Implementation (Software)

    http://pratikd-nitie-ie.blogspot.in/2012/08/agile-scrum-implementation.html

    PS - > Sorry for delay in posting here. I had posted the link on your blog at the following location before the deadline.
    http://nraoiekc.blogspot.in/2012/08/introduction-to-industrial-engineering.html

    ReplyDelete
  58. Sagar Bhore
    R.No, 83
    SPIRAL MODEL OF SOFTWARE DEVELOPMENT AND ENHANCEMENT
    http://sagarbhore.blogspot.in/2012/07/spiral-model-of-software-enhancement.html

    ReplyDelete
  59. Shenbagamoorthy M
    Roll No 91
    PGDIE 42 Sec B
    Dear sir,
    As per our discusiion i am updating the new link.Thank you
    http://shenbagamoorthypgdie42.blogspot.in/2012/10/ie-design-paper.html

    ReplyDelete
  60. Sir i have posted the link earlier but it was broken link , kindly accept the new link and plz review the paper

    Regards
    Shivangi goyal

    ReplyDelete
  61. Thanks for the lovely information that motivates a lot and gives proper information to information seekers, please provides few information about MS Pipe Dealers who dealers in Seamless Pipe and Galvanized Pipe.<a href="http://jrspipesandtubes.com/galvanized-pipe-dealers/>Galvanized Pipe Dealers</a>

    ReplyDelete
  62. Thanks for sharing this blog .It's Very Usefull for me.
    Trutech Product is the leading Transformer Manufacturers in Pune at the best cost visit us for:
    Transformer Manufacturers in India
    Transformer Manufacturers In Mumbai

    ReplyDelete
  63. Important blog information, thanks for sharing this article. It really a very good quality Pipe Insulation materials. More Details!

    ReplyDelete
  64. Bhushan Tube is a Leading Manufacturer and Supplier of Spiral Pipes, Larger Diameter Pipes, and Spiral Welded Pipes in Delhi, India. We always use high-quality raw materials to make these pipes. These pipes are used in the Transportation of Raw Water, Transportation of Gas, and Slurry Transportation. If you want to know more details about this product or get a dealership you can contact us via our website. We are manufactured high-quality products because customer satisfaction is our first priority. Our manufactured units are located in Delhi, Kochi, and Mumbai.

    Spiral Pipes

    ReplyDelete
  65. Great blog! This blog is very informative as I got to know more about formulation development india. Thank you for sharing! Keep writing...

    ReplyDelete
  66. Thank you for sharing such helpful information. It will be beneficial to all of them. Thanks for sharing this. Visit our website prismerp at for more information.

    ReplyDelete
  67. Hey this blog is really nice and informative thanks for sharing this
    Spiral Pipes
    ERW Boiler Tubes

    ReplyDelete