Wednesday, August 8, 2012

Design and Production Process Project - Section A - 2012





Assignment Part of Introduction to Industrial Engineering - Industrial Engineering Concepts Course

Course Page and Course Handouts


Mechanical Engineering

R.No.

25         Spur Gear  http://debashish-ie.blogspot.in/2012/08/spur-gear-manufacturing.html
Posted by at
Labels: ,

56 comments:

  1. OmkarAugust 9, 2012 at 2:29 AM

    Electronics and communication engineering

    R.No
    54 Bipolar junction transistor http://omkarvv.blogspot.in/2012/08/bipolar-junction-transistor.html

    ReplyDelete
  2. UnknownAugust 9, 2012 at 12:23 PM

    http://harshbudholiya.blogspot.in/2012/08/read-to-learn-learn-to-read.html

    ReplyDelete
  3. Meenakshi KumariAugust 9, 2012 at 1:45 PM

    Electronics and Communications Engineering

    46 BJT http://meenakshi-ie.blogspot.in/2012/08/design-and-production-process.html

    ReplyDelete
  4. UnknownAugust 9, 2012 at 10:43 PM

    JEETU RANA
    Agricultural Engineering
    Roll no. 39
    http://jeetu-ie.blogspot.in

    ReplyDelete
  5. UnknownAugust 10, 2012 at 4:15 PM

    Mechanical Engineering
    Roll No 40
    Manufacturing of Ball Bearing

    http://kaushalsahu-nitie.blogspot.in/2012/08/manufacturing-process-of-ball-bearing.html

    ReplyDelete
  6. UnknownAugust 10, 2012 at 4:29 PM

    Jayant Patware
    Roll no: 38
    http://jayantpatware.blogspot.in/2012/08/ie-component-design.html

    ReplyDelete
  7. UnknownAugust 10, 2012 at 5:18 PM

    http://ie42-ritesh-a.blogspot.in/2012/08/design-of-piston-for-bajaj-avenger-220.html

    ReplyDelete
  8. AnkitaAugust 10, 2012 at 9:00 PM

    Ankita Chauhan
    Electronics and Communication Engineering
    Component-Diode
    Roll no-14
    http://ankita-ie.blogspot.com

    ReplyDelete
  9. Chhavi AmetaAugust 10, 2012 at 11:21 PM

    COMPUTER ENGINEERING

    CHHAVI AMETA
    Roll NO 23
    NITIE, MUMBAI

    http://chhaviameta.blogspot.com/2012/08/computer-networks.html

    ReplyDelete
  10. UnknownAugust 10, 2012 at 11:45 PM

    Ali Akber Kapadia
    Roll No. 08
    http://aliakberindustrialengineering1.blogspot.in/

    ReplyDelete
  11. NoopurNITIE-IEAugust 10, 2012 at 11:48 PM

    Noopur Bhanagay
    Roll no. 52
    Computer Engineering
    Dyanamic Load Balancing
    http://nitietechno.blogspot.in/

    ReplyDelete
  12. UnknownAugust 11, 2012 at 12:00 AM

    http://aliakberindustrialengineering1.blogspot.in/

    ReplyDelete
  13. UnknownAugust 11, 2012 at 12:01 AM

    ABHISHEK KUMAR
    ROLL NO 05
    DESIGN OF SOLAR CHARGE CONTROLLER
    http://abhishekkumar05-ie.blogspot.in/2012/08/industrial-engineering-application-in.html

    ReplyDelete
  14. UnknownAugust 11, 2012 at 12:09 AM

    ABHISHEK KUMAR
    ROLL NO 05
    INDUSTRIAL ENGINEERING APPLICATION IN COAL HANDLING PLANT
    http://abhishekkumar05-ie.blogspot.in/2012/08/industrial-engineering-application-in.html

    ReplyDelete
  15. UnknownAugust 11, 2012 at 12:23 AM

    CHANDAN
    Roll no 21
    Mechanical Engg.

    DESIGN OF RAILWAY WHEEL
    http://chandannitie.blogspot.com/2012/08/design-of-railway-wheel-introduction.html

    ReplyDelete
  16. ashish chaurasiaAugust 11, 2012 at 12:45 AM

    http://ashishchaurasia-ie42.blogspot.in/2012/08/design-of-piston-piston-is-disc-which.html

    ReplyDelete
  17. UnknownAugust 11, 2012 at 12:49 AM

    http://nraoiekc.blogspot.in/2012/08/design-and-production-process-project.html

    ReplyDelete
  18. UnknownAugust 11, 2012 at 1:01 AM

    http://doleylokhinathpgdie42.blogspot.com/2012/08/design-doley-roll-no.html
    roll no.43
    electronics and telecom

    ReplyDelete
  19. UnknownAugust 11, 2012 at 1:04 AM

    PANKAJ KUMAR MOHLI
    PGDIE 56
    http://pankajmohli56.blogspot.in/2012/08/design-of-stapler.html

    ReplyDelete
  20. UnknownAugust 11, 2012 at 2:03 AM

    HITESH U SAWAI
    ROLL NO 037
    http://hiteshsawai37.blogspot.in/2012/08/industrial-engineering-application-in_10.html

    ReplyDelete
  21. AnonymousAugust 11, 2012 at 2:05 AM

    Roll No. 60,
    Electronics & Communication Engg.
    http://poonam-ie42.blogspot.in/2012/08/design-process-manufacturing-process-of.html

    ReplyDelete
  22. ChetanAugust 11, 2012 at 2:55 AM

    Dear Sir,
    I'm Chetan Rahate,(22) following is the links for
    Design of component Turing Machine:
    (Computer Science and Engineering)
    http://chetanrahateie.blogspot.in/2012/08/component-selected-is-turing-machine.html

    ReplyDelete
  23. UnknownAugust 11, 2012 at 3:04 AM

    AKSHAT SISODIA
    ROLL NO.-006
    MECHANICAL ENGINEERING

    http://akshatsisodiaie1.blogspot.in/2012/08/design-and-manufacture-of-standup-wheel.html

    ReplyDelete
  24. Mamta SahareAugust 11, 2012 at 3:15 AM

    Mamta Sahare
    Computer Science
    Roll no 44
    http://mamtasahare.blogspot.in/

    ReplyDelete
  25. aakanchaAugust 11, 2012 at 12:33 PM

    Aakancha Raj Tewari
    Roll no. 1
    PGDIE 42

    Blog link: http://aakancharaj.blogspot.in/2012/08/design-and-manufacturing-of-hrc-fuses.html

    ReplyDelete
  26. UnknownAugust 11, 2012 at 12:49 PM

    This comment has been removed by the author.

    ReplyDelete
  27. Abhinav GautamAugust 11, 2012 at 1:05 PM

    Abhinav Gautam
    Roll no 03
    Computer Science

    Banking Software System in Data warehousing
    http://ie42ieassignmentrollno03androllno53.blogspot.in/2012/07/banking-software-system-in-data.html

    ReplyDelete
  28. UnknownAugust 11, 2012 at 1:49 PM

    aNIRBAN LAHIRI
    ROLL NO 11
    BLOG LINK:http://anirbanlahirinitie.blogspot.in/2012/08/design-and-production-process-of-tmt-rod.html

    ReplyDelete
  29. UnknownAugust 11, 2012 at 2:13 PM

    Mohit Kumar
    Roll No. : 48
    Mechanical Engineering

    Manufacturing process of TMT Rod

    http://www.blogger.com/blogger.g?blogID=291331775213488491#editor/target=post;postID=8014535447096558977

    ReplyDelete
  30. UnknownAugust 11, 2012 at 5:04 PM

    Patil Kiran Natthu

    Roll No.58, Section A, PGDIE 42,

    Mechanical Engineering topic: Design of Suspension coil Spring for A. Double Wishbone type Suspension or B. Mc Pherson Struts*

    http://kiranpat.wordpress.com/2012/08/11/design-of-suspension-coil-spring-used-in-double-wishbone-lower-arm-suspended-suspension-or-double-wishbone-upper-arm-suspended-suspension-or-mc-pherson-struts-of-vehicles/

    OR

    http://kiranpat.wordpress.com/

    ReplyDelete
  31. Gaurav PandeyAugust 11, 2012 at 9:02 PM

    Gaurav pandey
    Roll no. - 33, section A PGDIE 42
    ELECTRONICS & INSTRUMENTATION ENGG.
    http://gauravpgdie.blogspot.in/2012/08/design-and-production-process-project.html

    ReplyDelete
  32. Ankit SharmaAugust 11, 2012 at 9:48 PM

    Ankit Sharma
    Roll no. 13
    Mechanical Engineering
    http://ankitindustrialengineering.blogspot.in/2012/08/industrial-engineering-assignment_11.html

    ReplyDelete
  33. AnikethAugust 11, 2012 at 10:38 PM

    Hello Sir,

    I am ANIKETH PATTNAIK
    ROLL NO: 10
    INSTRUMENTATION & CONTROL ENGINEER
    http://anikethpattnaik.blogspot.in/2012/08/design-and-production-process-project.html

    ReplyDelete
  34. UnknownAugust 12, 2012 at 12:04 AM

    RESPECTED SIR,
    NAME: HEMANTH KUMAR V
    ROLL NO:36
    CIVIL ENGINEER
    http://hemanthnitie.blogspot.in/2012/08/design-of-earthquake-resistant-building.html

    ReplyDelete
  35. Pavan Kumar VedulaAugust 12, 2012 at 3:48 AM

    Dear Sir,
    I am Pavan Kumar Vedula
    Roll No: 126
    http://pkvedula-ie.blogspot.com/2012/08/design-and-manufacture-of-suspension.html

    ReplyDelete
  36. UnknownAugust 12, 2012 at 1:51 PM

    Anurag Verma (17)
    Garima Verma (31)
    PGDIE 42-A
    http://industrialengineering0801.blogspot.in/2012/08/cmos-not-gate-design-process.html

    ReplyDelete
  37. UnknownAugust 12, 2012 at 4:38 PM

    Nilesh Ralegaonkar (51)
    Dharmendra Upadhyay (27)

    IE-42, Section A
    http://nilesh-ie.blogspot.com/2012/08/design-report-transmission-shaft.html

    ReplyDelete
  38. UnknownAugust 12, 2012 at 5:37 PM

    Ashish Modi(19)
    Ankit Saxena(12)

    IE-42, Section A
    http://ashishmodiie.blogspot.in/2012/08/national-institute-of-industrial.html#!/2012/08/national-institute-of-industrial.html

    ReplyDelete
  39. UnknownAugust 12, 2012 at 8:52 PM

    Abhinav Jaiswal
    Roll No.: 2
    Mechanical Engineer

    Design and Manufacturing of Spring

    http://abhinavjaiswal-ie42.blogspot.in/2012/08/design-and-manufacturing-of-springs.html

    ReplyDelete
  40. Pawan KushwahAugust 12, 2012 at 11:55 PM

    This comment has been removed by the author.

    ReplyDelete
  41. Pawan KushwahAugust 13, 2012 at 12:00 AM

    Pawan kushwah
    Roll no. 59
    Section A

    Design of Turing m/c

    http://ie-pgdie42-pawankushwah.blogspot.in/2012/08/design-of-turing-machine.html

    ReplyDelete
  42. UnknownAugust 13, 2012 at 1:11 AM

    This comment has been removed by the author.

    ReplyDelete
  43. Naveen YadavAugust 13, 2012 at 3:39 AM

    Naveen Kumar Yadav
    Roll No. 49
    Mechanical Engineering

    http://naveenyadav49.blogspot.in/2012/08/design-of-camshaft.html

    ReplyDelete
  44. UnknownAugust 13, 2012 at 4:24 AM

    Parush Sarohi
    Roll no 57
    Section A
    Production Engineer
    http://parush42.blogspot.in/2012/08/design-and-manufacturing-of-die-casting.html

    ReplyDelete
  45. UnknownAugust 13, 2012 at 11:49 PM

    Ankur Kumar
    Roll no 16
    Mechanical Engineer
    http://ankurkumar-ie.blogspot.in/2012/08/spur-gear-manufacturing.html

    ReplyDelete
  46. Anurag VermaAugust 14, 2012 at 3:34 AM

    Anurag Verma
    Roll No.17
    Electrical and Electronics Engineering
    CMOS: NOT Gate Design Process
    Anurag Verma (17)
    Garima Verma (31)
    http://industrialengineering0801.blogspot.in/2012/08/cmos-not-gate-design-process.html

    ReplyDelete
  47. harsh chandakAugust 14, 2012 at 3:36 AM

    Harsh Chandak
    Roll No 35
    Mechanical Engineer
    http://harshchandak.blogspot.in/2012/08/design-of-flywheel-introduction.html

    ReplyDelete
  48. UnknownAugust 14, 2012 at 5:33 AM

    This comment has been removed by the author.

    ReplyDelete
  49. UnknownAugust 14, 2012 at 5:35 AM

    Kumara Swamy.D.S
    Roll No: 41

    Ganesh.N
    Roll No:30

    Design and Manufacture of Fasteners

    http://kumarsawamy41.blogspot.com/2012/08/design-and-manufacture-of-fasteners.html

    ReplyDelete
  50. UnknownAugust 15, 2012 at 1:01 AM

    Deepika Sharma
    Roll no 26

    Sudha
    Roll No 125

    Designing of Piston

    http://deepikasharma25.blogspot.com/2012/08/designing-and-fem-analysis-of-piston.html

    ReplyDelete
  51. UnknownAugust 16, 2012 at 2:09 AM

    Akshay Thapliyal
    Roll no. 7
    DESIGN AND MANUFACTURING OF HRC FUSES
    http://www.blogger.com/blogger.g?blogID=642352803712995622#editor/target=post;postID=1782761584928469503

    ReplyDelete
  52. Nupur KumarAugust 20, 2012 at 3:20 PM

    http://ie42ieassignmentrollno03androllno53.blogspot.in/2012/07/banking-software-system-in-data.html

    ReplyDelete
  53. sachin jayntAugust 22, 2012 at 1:09 PM

    SACHIN JAYNT
    ROLL NO-80
    SECTION-B
    DESIGN AND MANUFACTURING OF HEAT EXCHANGER
    http://sachinjaynt.blogspot.com/2012/08/blog-post_15.html

    ReplyDelete
  54. UnknownSeptember 19, 2012 at 2:22 AM

    Ashish Tomar
    Roll no-20
    http://ashishtomarnitie.blogspot.in/2012/08/design-of-springs.html
    Respected Sir,
    Sorry for the broken link, I have submitted the correct link here

    ReplyDelete
  55. UnknownSeptember 22, 2012 at 1:27 AM

    Noopur Bhanagay
    Roll no - 52
    Dynamic Load Balancing
    http://noopurbhanagay.blogspot.in/2012/09/dynamic-load-balancing-in-distributed.html#!/2012/09/dynamic-load-balancing-in-distributed.html

    ReplyDelete
  56. UnknownOctober 31, 2012 at 5:40 PM

    Shivangi Goyal
    Roll no-93
    FMS Loading Problem
    http://shivangi-goyal.blogspot.in/

    ReplyDelete

Subscribe to: Post Comments (Atom)