Friday, December 17, 2021

Industrial Engineering - Research Themes and Research Papers

Photo:National Conference on Industrial Engineering and Technology Management (NCIETM) 2014 - Inauguration on 29 October 2014 at NITIE, Mumbai
On the dais: from right Dr. K.V.S.S. Narayana Rao (Conference Chair), Dr. Karuna Jain (Director, NITIE)), Er. R.G. Rajan (CMD, RCF), Commander Bhandarkar (Chairman, IIIE), Dr. Sachin Kamble (Chair, Conference), Sonal Daulatkar (Fellow Student, NITIE)

Industrial Engineering 4.0

Narayana Rao K.V.S.S., "Industrial Engineering 4.0-Productivity Improvement in Industry 4.0 Implementations - Process Steps – Proposal."

Advances in Mechanical Engineering in the Era of New Technologies, Siksha ‘O’ Anusandhan (Deemed to be University), Bhubaneswar, INDIA.2020, p.414

https://nraoiekc.blogspot.com/2018/05/applied-industrial-engineering-process.html

"Application of IoT-Aided Simulation to Manufacturing Systems in Cyber-Physical System"

Yifei Tan , Wenhe Yang 2, Kohtaroh Yoshida 2 and Soemon Takakuwa 2

2 Department of Industrial and Systems Engineering, Chuo University, 1-13-27 Kasuga, Bunkyo-ku, Tokyo 112-8551, Japan;

Wenhe Yang, https://researchers.chuo-u.ac.jp/Profiles/5/0000406/detail.html?lang=en&achievement=meeting_achievement

https://www.researchgate.net/scientific-contributions/2083142925-Wenhe-Yang

Journal of Industrial Engineering International

Journal of Industrial Engineering International is a peer-reviewed open access journal published under the brand SpringerOpen, covering all aspects of industrial engineering. It is fully supported by the Islamic Azad University, who provide funds to cover all costs of publication, including the Article Processing Charges (APC’s) for all authors. Therefore the journal is both free to read and free to publish in.
http://www.springer.com/engineering/production+engineering/journal/40092

Journal of Industrial and Production Engineering

Official Journal of the Chinese Institute of Industrial Engineers
http://www.scimagojr.com/journalsearch.php?q=21100241791&tip=sid&clean=0
Volume 32, Issue 2, 2015
http://www.tandfonline.com/toc/tjci21/current#.VScvHtyUd1Y

International Journal of Applied Industrial Engineering (IJAIE)

International Journal of Industrial Engineering & Production Research

http://ijiepr.iust.ac.ir/

Industrial Engineering Principles & Techniques

 Value Analysis and Engineering

Integrating theory of inventive problem solving into the Value Engineering process
Mao, X.M. , Zhang, X.Q., Abourizk, S.
Proceedings of the 4th International Structural Engineering and Construction Conference, ISEC-4 - Innovations in Structural Engineering and Construction , v. 2, 2008, p. 1453-1458
http://repository.ust.hk/ir/Record/1783.1-46678

“The use of Target Costing and Value Engineering at ALSTOM Company”, 2010 Degree Report
http://www.diva-portal.org/smash/get/diva2:326716/FULLTEXT01.pdf

Optimal Selection of Alternatives: Application of Grey Theory to Value Engineering, 2013
http://iasir.net/IJETCASpapers/IJETCAS13-308.pdf

Vahid Shahhosseini, Mohammad Reza Afshar & Omid Amiri (2017)
"Value engineering practices in infrastructure projects: a case study of Ilam Gas Refinery's water transmission system at Reno Mountain, Iran,"
International Journal of Construction Management,
DOI: 10.1080/15623599.2017.1326298

 Methods Efficiency Engineering

ECRS’s Principles for a Drinking Water Production Plant.
Klorklear Wajanawichakon1* and Chet Srimitee2
IOSR Journal of Engineering
May. 2012, Vol. 2(5) pp: 956-960
http://www.iosrjen.org/Papers/vol2_issue5/D025956960.pdf

Productivity improvement in shoe making industry By using method study
Parthiban.P, , Raju.R
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2012
http://www.iosrjournals.org/iosr-jmce/papers/ICRTEM/ME/Volume-4/IOSRME01.pdf?id=7622

 Motion Economy Studies

Principles of motion economy versus physiological sustainability: some lessons from the forest industry
Paul Dickinson (Assoc. NZ Ergonomist), APIEMS Conference, 2013
http://apiems.net/conf2013/1039.pdf

 Work Simplification

 Work Measurement

ASEAN Industrial Engineering and Work Measurement Practices Phenomenon
Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management , Bali, Indonesia, January 7 – 9, 2014
http://iieom.org/ieom2014/pdfs/125.pdf

Improving Work Measurement Practice for Method Improvement and Process Design Using Video Analysis
Dirk Van Goubergen; Research group: Lean Enterprise Research Center; Date: 2012; Author:
Peeradaech Suwittayaruk
http://ir18.ugent.be/website/?q=node/1556

DEVELOPING MTM MODIFIERS FOR FINGER DISABILITIES PDF
Anand Subramanian, Anil Mital
FINGER DISABILITIES AND HIGHER LEVEL TASKS – DEVELOPING AND VALIDATING MTM MULTIPLIERS PDF
Anand Subramanian, Anil Mital
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/19

Time Standards and Disability: A Work Measurement Perspective PDF
Anand Subramanian, Anil Mital
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 1 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/11

 Facility Location and Layout Design

Centroid – A Widely Misunderstood Concept In Facility Location Problems PDF
William V Gehrlein, Mugdim Pasic
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 2 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/17

A Multi-Variate/Multi-Attribute Approach for Plant Layout Design PDF
Ali Azadeh, H. R Izadbakhsh
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

 Engineering Optimization

Engineering Optimization Text Book by S.S. Rao & S.S. Rao, John Wiley, 2009
http://books.google.co.in/books?id=YNt34dvnQLEC - Book

Hybrid Taguchi-Harmony Search Algorithm for Solving Engineering Optimization Problems PDF
Ali Riza Yildiz 286-293
A Group Decision-Making Framework with Various Rating Attitudes using Fuzzy Set Theory to Prioritize Design Requirements in Quality Function Deployment PDF
Chin-Hung Liu 294-303
Fuzzy Topsis Decision Method for Configuration Management PDF
Shu-Hsuan Chang, Hwai-En Tseng 304-313
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 3 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/13

 Applied Operation Research / Optimization

Offsetting Inventory Cycles using Mixed Integer Programming and Genetic Algorithm PDF
Ilkyeong K Moon, Byung Chul Cha, Sun Kwon Kim
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 3 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/13

A Mathematical Model for a Multi-Commodity, Two-Stage Transportation and Inventory Problem PDF
P Ji, K J Chen, Q P Yan
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 3 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/13

A Fuzzy Group Decision-Making Method in the Relationship Between Customer Requirements and Technical Measures of Quality Function Deployment PDF
Chin-Hung Liu, Hsin-Hung Wu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

Simultaneous Optimization of Robust Design with Quantitative and Ordinal Data
Ful-Chiang Wu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

 Applied Statistics

MONITORING OF THE STENCIL PRINTING PROCESS USING A MODIFIED REGRESSION RESIDUAL CONTROL CHART: AN EMPIRICAL STUDY PDF
Tsung-Nan Tsai, Long-Hui Chen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/19

Clustering Techniques for Barge to Boat Assignment PDF
Dimitrios Drosos, Gail W DePuy, Don G Taylor, Todd C Whyte
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 2 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/17

 Six Sigma

Combining Lean, Six Sigma, and the Theory of Constraints to Achieve Breakthrough Performance
A Velocity White Paper from Goldratt Institute, 2009

DEAPS-An Alternative to DMAIC? – A Case Study PDF
Ram R Bishu, Erick C Jones, Rama Thummalapalli 214-226

Beyond Six Sigma – A Control Chart for Tracking Defects per Billion Opportunities (dpbo) PDF
Daryl Santos 227-233

Professional Perceptions of Six Sigma’s Value PDF
Jerusha Myrick, Tracy Burkhardt, Linda Nelms, Steve Patch, Robert Yearout
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/18

Assessing Product Satisfaction Performance using 6-Sigma Methodology and S/N Ratio Approach - the case of PDA PDF
Chia-Jen Tao, Shui-Chuan Chen, Chin-Tsung Hsieh
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 1 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/16

 Engineering Economics

ECONOMIC ANALYSIS OF CONDITION BASED MAINTENANCE
Fatih Camci, Ashyrmuhammet Berdinyaz, Mehmet Sevkli, Saim Baskan
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 8 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/44

Application of ranking method in evaluation of engineering investment projects
Dragan Lj Milanovic, Dragan D Milanovic, Mirjana Z Misita
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 4 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/27

MAKING PRODUCT CUSTOMIZATION PROFITABLE
Niels Henrik Mortensen, Lars Hvam, Anders Haug, Per Boelskifte, Christian Lindschou, Simon Frobenius
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 1 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/22

 Production Economics

 Engineering Ergonomics

 Systems Dynamics and Modelling

 Simulation

 Lean Systems - Waste Elimination Practices of Toyota Production System

New IE Methods proposed by Shigeo Shingo (SMED, Poka Yoke, Zero Breakdowns and Defects, 7 Waste Model)

Pacemaker, Bottleneck and Order Decoupling Point in Lean Production Systems
Ibon Serrano, Rodolfo de Castro, Ainhoa Goienetxea
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/19

Efficacy of Lean Metrics in Evaluating the Performance of Manufacturing Systems PDF
Mohammed Khadem, Sk Ahad Ali, Hamid Seifoddini
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

Application of Industrial Engineering in Technical Processes

 Product Design Processes

OBSERVED BENEFITS FROM PRODUCT CONFIGURATION SYSTEMS
Lars Hvam, Anders Haug, Niels Henrik Mortensen, Christian Thuesen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 5 - 6 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/68

PRODUCT PLATFORM SCREENING AT LEGO
Niels Henrik Mortensen, Thomas Steen Jensen, Ole Fiil Nielsen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 11 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/64

A Framework of Integrated Recyclability Tools For Automobile Design
Novita Sakundarini
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 10 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/60

A FRAMEWORK FOR THE ADOPTION OF RAPID PROTOTYPING FOR SMEs: FROM STRATEGIC TO OPERATIONAL
Ayyaz Ahmad
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 3 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/53

Internet User Research in Product Development: rapid and low cost initial research for Information
Aruna Shekar
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 1 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/51

IMPROVING DECISION MAKING IN THE EARLY PHASES OF CONFIGURATION PROJECTS
Niels Henrik Mortensen, Ulf Harlou, Lars Hvam, Anders Haug
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 9 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/45

The Optimal Cost Estimating for Improvement of Product Design
Hongchul Lee, Jaemyung Lee
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 5 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/32

FACILITATING DESIGN FOR ASSEMBLY THROUGH THE ADOPTION OF A PROACTIVE DESIGN METHODOLOGY
Anoop Arun Desai, Anil Mital
IMPROVING MAINTAINABILITY OF PRODUCTS THROUGH THE ADOPTION OF A COMPREHENSIVE DfX METHODOLOGY
Anoop Arun Desai, Anil Mital
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 2 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/23

Product Modularization Considering Cost and Manufacturability of Modules PDF
Bimal Nepal, Leslie Monplaisir, Nanua Singh, Attila Yaprak
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

 Manufacturing Systems

DESIGN AND IMPLEMENTATION OF LEAN FACILITY LAYOUT SYSTEM OF A PRODUCTION LINE
Zhenyuan Jia, Xiaohong LU, Wei Wang, Defeng Jia
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 7 - 8 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/69

A Methodology of Collaborative Performance Measurement for Manufacturing Collaboration
Jae-Yoon Jung, Jinsung Lee, Jihwan Jung, Sang-Kuk Kim, Dongmin Shin
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 3 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/53

SIMULATION, MODELING AND AVAILABILITY ANALYSIS OF SOLE LASTING UNIT IN SHOE MAKING INDUSTRY
Vikas Modgil
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 2 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/63

AN INVESTIGATION OF INTERNAL LOGISTICS OF A LEAN BUS ASSEMBLY SYSTEM VIA SIMULATION: A CASE STUDY
Aric Johnson
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 1 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/51

ADVANCED MACHINE TOOLS: HOW BEST TO TRAIN OPERATORS
Rama Thummalapalli, Vineeth R Yeddula, Vijaya K Musunuru, Erick C Jones, Ram Bishu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 12 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/48

OPTIMIZATION OF MACHINING PARAMETERS FOR TURNING AL-SIC (10P) MMC USING TAGUCHI GREY RELATIONAL ANALYSIS
Ramanujam Radhakrishnan, Raju Ramasamy, Nambi Muthukrishnan
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 11 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/47

Improvement of process capability through Six Sigma and Robust Design-Case study of an Indian steel Industry
Dr. Yadavalli Basavaraj
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 9 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/45

Product Family Formation for Reconfigurable Manufacturing using a Bi-criterion Evolutionary Algorithm
Laxmi Narayan Pattanaik, Vikas Kumar
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 9 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/45

A Simulation Approach to Improve Assembly Line Performance
BERNARDO VILLARREAL, Maria Roble Alanis
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 6 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/33

Design and implementation of Lean Facility Layout System of a Production Line PDF
Xiaohong Lu, Zhenyuan Jia, Jiangyuan Yang, Huifang Liu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 5 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/32

A METHODOLOGY FOR ANALYSIS OF MANUFACTURING OPERATIONS DUE TO COMPLEXITY
Ali Kamrani
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 2 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/29

MATHEMATICAL MODELLING AND SIMULATION OF WORKING OF AN ENTERPRIZE MANUFACTURING ELECTRIC MOTORS
Vivek Hari Tatwawadi, Jayant Pandurang Modak, Suresh Chilbule
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 4 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/27

Critical equipments decision support system for process layout environment: a case of wafer FAB
Cheng-Wen Chang, David Ming-Huang Chiang, Yen-Chang Chang, Nian-Ze Hu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 3 (2010)

A WAVELET-BASED VARIABLE CONTROL PROCEDURE FOR DETECTING PROCESS MEAN SHIFT
Chien-Chih Wang, Wei-Min Wen
DECIDING OPTIMAL SPECIFICATION LIMITS AND PROCESS ADJUSTMENTS UNDER QUALITY LOSS FUNCTION AND PROCESS CAPABILITY INDICES
Shih-Chou Kao
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 3 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/25

Scrap Reduction By Using Total Quality Management Tools PDF
Sanjay Kumar, S.S Mantha, Arun Kumar
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/19

MONITORING OF THE STENCIL PRINTING PROCESS USING A MODIFIED REGRESSION RESIDUAL CONTROL CHART: AN EMPIRICAL STUDY PDF
Tsung-Nan Tsai, Long-Hui Chen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/19

PERFORMANCE ANALYSIS OF A MULTIPLE COMPONENT MANUFACTURING SUBSYSTEM OF A RUBBER TUBE PRODUCTION PLANT UNDER PREEMPTIVE RESUME PRIORITY REPAIR PDF
Atul Goyal, S.K Sharma, Pardeep Gupta
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/19

Implementation of Six Sigma in a Manufacturing Process: A Case Study PDF
Adan Valles, Jaime Sanchez, Salvador Noriega, Berenice Gómez Nuñez
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)

Six Sigma Improvement Project for Automotive Speakers in an
Assembly Process
Adan Valles, Salvador Noriega, Jaime Sanchez, Erwin Martínez, and Jesús Salinas
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 3 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/article/view/264/107

Techno-Economic Analysis of Hybrid Layered Manufacturing
UT symposium 2005 paper
http://utwired.engr.utexas.edu/lff/symposium/proceedingsarchive/pubs/manuscripts/2005/2005-34-karunakaran.pdf
(A Presentation on HLM by Prof K.P. Karunakaran, IIT Bombay - https://csissaclay.files.wordpress.com/2013/07/aefa_2013_karunakaran.pdf)

COMPUTER BASED WELDING TRAINING SYSTEM PDF
Sakol Teeravarunyou, Bovornchok Poopatb
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 2 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/17

A Comparative Study of the Three Predictive Tools for Forecasting a Transfer Line's Throughput PDF
Patrick A Hillberg, Sankar Sengupta, Robert P Van Til
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 1 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/16

A Revised Version of Ant Colony Algorithm for One-Dimensional Cutting Stock Problem PDF
Kourosh Eshghi, Hasan Javanshir
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 4 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/14

Electroplating Line Flexible Control using P-Time Petri Nets Modeling and Hoist Waiting Times Calculation
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 3 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/13

Design of An Artificial Neural Network for Assembly Sequence Planning System PDF
Cem Sinanoglu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 1 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/11

Statistical Optimization of Process Variables In A Continuous Inkjet Process – A Case Study PDF
Salil Desai, Michael Lovell
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 1 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/11

 Material Handling Systems

Material handling and Process Imprvement using Lean Manufacturing Principles
Tushar Kirtikumar Acharya
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 7 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/43

 Quality and Inspection Systems

The Development of a Training Expert System for TFT-LCD Defects Inspection PDF
Jung-Jung Chang, Sheue-Ling Hwang, Chao-Hua Wen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 1 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/16

 Storage and Warehouse Systems

 Supply Chain Systems

A Study of Key Factors in the Introduction of RFID into Supply Chains through the Adaptive Structuration Theory
Mei Ying Wu, Chun Wei Ku
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 5 - 6 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/68

Quantifying the Bullwhip Effect in a Seasonal Supply Chain with Stochastic Lead Time
Dong Won Cho, Young Hae Lee
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 1 - 2 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/66

DISTRIBUTED OPERATIONS PLANNING IN THE LUMBER SUPPLY CHAIN: MODELS AND COORDINATION.
Jonathan Gaudreault, Pascal Forget, Jean-Marc Frayret, Alain Rousseau, Sebastien Lemieux, Sophie D'Amours
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 3 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/25

SUPPLY NETWORK CONFIGURATION USING THE VALUE ENGINEERING BASED METHOD
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 1 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/22

Modeling and Solving an Integrated Supply Chain System PDF
Minnie H Patel, Wenbin Wei, Yasser Dessouky, Zengbin Hao, Ronnaporn Pasakdee
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 1 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/16

Modeling Supply Chain Diagnostics with Fuzzy Dynamic Bayesian Networks PDF
Han-Ying Kao, Chia-Hui Huang
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 3 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/13

 Logistics Systems

OPERATION PLANNING FOR EMPTY CONTAINER REPOSITIONING
Yin Long, Loo Hay Lee, Ek Peng CHEW, Yi LUO, Jijun SHAO, Arpan SENGUTA, Selina M L Chua

A STRUCTURAL AND SEMANTIC APPROACH TO SIMILARITY MEASUREMENT OF LOGISTICS PROCESSES
Bernardo Nugroho Yahya, Hyerim Bae, Joonsoo Bae

COLLABORATION BASED RECONFIGURATION OF PACKAGE SERVICE NETWORK WITH MULTIPLE CONSOLIDATION TERMINALS
Hyunjeung Ko

INTRODUCING THE CONCEPT OF AUTONOMOUS AGENTS AS A TOOL TO ASSIST THE ANALYSIS OF THE COLLABORATION BETWEEN MANUFACTURED EXPORTERS AND MARITIME SHIPPERS
Vanina Macowski Durski Silva, Antonio G Novaes, Bernd Scholz-Reiter, Jakub Piotrowski

LOGISTICAL SERVICE PROVIDER TRIADIC RELATIONAL DYNAMICS
Paul Childerhouse

OPTIMAL PRICING AND GUARANTEED LEAD TIME WITH CONSIDERATION OF LATENESS PENALTIES
Chulung Lee
Planning for Selective Remarshaling in an Automated Container Terminal Using Coevolutionary Algorithms
Kiyeok Park, Taejin Park, Kwang Ryel Ryu

International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 1 - 2 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/66

Tracking and tracing of logistics networks: perspective of real-time business environment
AHM Shamsuzzoha, Petri Helo
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 3 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/53

SIMULATION MODELING OF OUTBOUND LOGISTICS OF SUPPLY CHAIN: A CASE STUDY OF TELECOM COMPANY
Arvind Jayant, pardeep Gupta, Suresh Garg, Subhash Wadhwa
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 2 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/63

DESIGN AND SIMULATION OF A LOGISTICS NETWORK FOR A TELECOM PRODUCTS SUPPLY APPLICATION: A CASE STUDY
Ming Zhou, Xu Chen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 2 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/23

 Information Systems

SYSTEM RELIABILITY WITH ROUTING SCHEME FOR A STOCHASTIC COMPUTER NETWORK UNDER ACCURACY RATE
Yi-Kuei Lin
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 5 - 6 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/68

Improvement and Performance Evaluation of Uplink Packet Scheduling for Wireless Broadband Internet
Jang Hyun Baek, Kyung Hee Kim, Jin-Won Park
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 10 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/46

VR-Based Robot Programming and Simulation System for an Industrial Robot PDF
Yap Hwa Jen, Zahari Taha, Lee Jer Vui 314-322
Web-Enabled Vision Guided Robotic Tracking Within the Framework of E-Manufacturing PDF
Yongjin Kwon

International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 3 (2008)

 Pollution Control Systems

 Energy Engineering

INDUSTRY ENERGY EFFICIENCY ANALYSIS IN NORTHEAST BRAZIL: PROPOSAL OF METHODOLOGY AND CASE STUDIES
Miguel Melo, Luiz Bueno, Sergio Campello
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 11 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/64

 Reliability Engineering and Maintenance

PRODUCT QUALITY-BASED METHODOLOGY FOR MACHINE FAILURE ANALYSIS AND PREDICTION
Hazem Smadi, Ali Kamrani
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 11 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/47

IDENTIFICATION OF THE CRITICAL PHASES AND DECISION-MAKING CRITERIA FOR THE SHUTDOWN OF CHEMICAL PROCESSING PLANTS. CASE STUDIES: SOUTH AMERICA, SPAIN AND PORTUGAL.
Luis Jose Amendola, T. Depool, M. A. Artacho
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 3 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/25

Determining the periodic maintenance interval for guaranteeing the availability of a system with a linearly increasing hazard rate: Industry Application PDF
Woohyun Kim, Suneung Ahn
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 2 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/17

 Transport Systems

Hierarchical approach to Vehicle Routing and Scheduling
Kyoung C Kim, Ji U Sun, Shi W Lee
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 1 - 2 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/66

TOTAL COST OF OWNERSHIP FOR RAILWAY ASSETS: A CASE STUDY ON BOXN
WAGONS OF INDIAN RAILWAYS
2004 conference paper
http://www.apiems.net/archive/apiems2004/pdf/apiems2004_8.5.pdf
(More conference papers are available on apiems.net site. Go through them)

Optimal Fleet Size, Delivery Routes, and Workforce Assignments for the Vehicle Routing Problem with Manual Materials Handling
Prachya Boonprasurt, Suebsak Nanthavanij
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 6 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/56

Airspace Complexity Measurement: An Air Traffic Control Simulation Analysis PDF
Parimal H Kopardekar, Albert Schwartz, Sherri Magyarits, Jessica Rhodes
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 1 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/16

Applications of Industrial Engineering in Business Processes

 Marketing and Selling Processes

ORDER PROCESS FLOW OF MASS CUSTOMIZATION BASED ON SIMILARITY EVALUATION
XU Xuanguo
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 5 - 6 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/68

BIOBJECTIVE MODEL FOR REDESIGNING SALES TERRITORIES
Juan Gabriel Correa
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 10 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/59

Cycle Time Improvement by a Six Sigma Project for the Increase of New Business Accounts PDF
Marcela White, Jorge Luis Garcia Alcaraz, Jesus Andres Hernandez, Jorge Meza Jimenez
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 4 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/18

 Distribution

Delivery Management System Using the Clustering based Multiple Ant Colony Algorithm: Korean Home Appliance Delivery
taeho kim, Hongchul Lee
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 21, No 2 (2014)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/73

AN APPLICATION OF CAPACITATED VEHICLE ROUTING PROBLEM TO REVERSE LOGISTICS OF DISPOSED FOOD WASTE
Hyunsoo Kim, Jun-Gyu Kang, Wonsob Kim
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 21, No 1 (2014)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/72

HYBRID FLOW SHOP SCHEDULING PROBLEMS INVOLVING SETUP CONSIDERATIONS: A LITERATURE REVIEW AND ANALYSIS
Márcia de Fátima Morais, Moacir Godinho Filho, Thays Josyane Perassoli Boiko
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 11 - 12 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/71

An Introduction to Distribution Operational Efficiency
Bernardo Villarreal, Fabiola Garza, Imelda Rosas, David Garcia
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 7 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/57

 Accounting Processes

 Customer Service Processes

 Human Resource Recruitment Processes

 Purchase Processes

Industrial Engineering in Managerial Processes

 Factory and Facilities Location

Factory Relocation of Global Manufacturing Enterprises: A Case Study
Jun-Der Leu, Yu-Tsung Huang
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 10 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/46

An Efficient Heuristic Solution to the Single-Facility Euclidean Location Problem
Ching-Chung Kuo
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 2 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/23

 Manpower Planning (Organization and Staffing Functions of Management)

A QUANTITATIVE PERFORMANCE EVALUATION MODEL BASED ON A JOB SATISFACTION-PERFORMANCE MATRIX AND APPLICATION IN A MANUFACTURING COMPANY
Adnan Aktepe, Suleyman Ersoz
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 6 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/56

The optimal organization structure design problem in make-to-order enterprises
Jesus Alonso Mena, Chin-Sheng Chen
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 4 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/54

Heuristic Approach to Workforce Scheduling with Combined Safety and Productivity Objective
Suebsak Nanthavanij, Sorawit Yaoyuenyong, Chawalit Jeenanunta
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 4 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/27

 Inventory Control and Materials Planning (Inventory Management)

A CLASSIC AND EFFECTIVE APPROACH TO INVENTORY MANAGEMENT
José Angel López-Garces, Abraham Mendoza, Javier Masini-Aguilera
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 5 - 6 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/68

THE OPERATION OF VENDING MACHINE SYSTEMS WITH STOCK-OUT-BASED, ONE-STAGE ITEM SUBSTITUTION
Yang-Byung Park, Sung-Joon Yoon
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 11 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/64

AN EPQ PRODUCTION-INVENTORY MODEL WITH VARIABLE HOLDING COST
Hesham Alfares
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 5 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/55

DEVELOPMENT AND APPLICATION OF A DECISION MODEL FOR THE INTEGRATED PRODUCTION AND MATERIAL PLANNING OF COLOR FILTER MANUFACTURING INDUSTRY: AN EMPIRICAL STUDY
Jun-Der Leu, Ta-Chun Wen, Kuei-Hu Chang
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 4 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/27

MINIMIZATION OF WORK IN PROCESS INVENTORY IN HYBRID FLOW SHOP SCHEDULING USING FUZZY LOGIC
Sanjoy Kumar Paul, Abdullahil Azeem
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 2 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/23

 Production Planning and Control (Production and Operations Management)

A HYBRID ELECTROMAGNETISM-LIKE ALGORITHM FOR A MIXED-MODEL ASSEMBLY LINE SEQUENCING PROBLEM
Hong-Sen Yan, Tian-Hua Jiang, Fu-Li Xiong
OPTIMAL JOB SCHEDULING OF A RAIL CRANE IN RAIL TERMINALS
Duy Vu Anh Nguyen, Won Young Yun
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 21, No 3 (2014)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/74

A Combined Approach of Cycle Time Estimation in Mass Customization Enterprise
feng liang
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 9 - 10 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/70

Parallel Kanban-ConWIP System for Batch Production in Electronics Assembly
Mei Yong Chong, Joshua Prakash, Suat Ling Ng, Razlina Ramli, Jeng Feng Chin
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 7 - 8 (2013)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/69

Applying Genetic Local Search Algorithm to Solve the Job-Shop Scheduling Problem
Chuanjun Zhu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 10 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/59

PRODUCTION LEAD TIME VARIABILITY SIMULATION – INSIGHTS FROM A CASE STUDY
Gandolf R. Finke, Mahender Singh, Paul Schönsleben
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 5 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/55

AN INTEGRATED UTILISATION, SCHEDULING AND LOT-SIZING ALGORITHM FOR PULL PRODUCTION
Olufemi Adewumi Babatunde Adetunji, Venkata Yadavalli
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 3 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/53

GENETIC ALGORITHMS WITH A NEW REPAIR OPERATOR FOR ASSEMBLY JOB SHOP SCHEDULING
Fuji Wang, Zhenyuan Jia, Wei Liu, Guokai Zhao
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 7 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/43

AGGREGATE PRODUCTION PLANNING WITH FUZZY DEMAND AND VARIABLE SYSTEM CAPACITY BASED ON TOC MEASURES PDF
Busaba Phruksaphanrat, Ario Ohsato, Pisal Yenradee
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 5 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/32

Shop-Floor Control For Batch Operations With Time Constraints In Wafer Fabrication
Ying-Mei Tu, Hsin-Nan Chen, Tsai-Feng Liu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 2 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/23

An Aggregate Production Planning Strategy Selection Methodology based on Linear Physical Programming PDF
Bahadır Gulsun, Gulfem Tuzkaya, Umut R Tuzkaya, Semih Onut 135-146

Strategic Paradigms for Manufacturing Management (Spmm): Key Elements and Conceptual Model PDF
Moacir Godinho Filho, Flavio Cesar Faria Fernandes
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 2 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/17

Heuristic Genetic Algorithm for Workforce Scheduling with Minimum Total Worker-Location Changeover PDF
Krisada Asawarungsaengkul, Suebsak Nanthavanij
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 4 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/14

Assessing the Availability and Allocation of Production Capacity in a Fabrication Facility Through Simulation Modeling: A Case Study
J. H Marvel, M. A Schaub, G. R Weckman
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

A Hit-Rate Based Dispatching Rule For Semiconductor Manufacturing PDF
Muh-Cherng Wu, Ting-Uao Hung
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 1 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/11

 Project Planning and Control (Project Management)

A GENETIC ALGORITHM APPROACH FOR OPTIMIZING CHEMICAL TOWER CONSTRUCTION PROJECT SCHEDULING WITH DYNAMIC RESOURCES CONSTRAINTS
Hsian-Jong Hsiau, Chun-Wei R.Lin
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 17, No 2 (2010)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/23

 Budgeting and Budgetary Control (Cost Management)

 Maintenance Planning and Control (Maintenance Management)

A mechanism for linking user’s operational requirements with reliability and maintenance
schedule for machine tool
M.S. Kulkarni, IIT Delhi
http://web.iitd.ac.in/~mskulkarni/Papers/Bhupesh/BL_2010_IJRS.pdf

 Supply Management (Supplier Selection and Evaluation)

A Supplier Selection Method Using AR- DEA and Fuzzy VIKOR
Ali Mohaghar, Mohammad Reza Fathi, Abdol Hossein Jafarzadeh
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 20, No 5 - 6 (2013)

A SUPPLIER DISCOVERY FRAMEWORK FOR EFFECTIVE AND EFFICIENT CONFIGURATION OF A SUPPLY CHAIN
Choonghyun Lee, Young Hoon Lee, Buhwan Jeong, Hyunbo Cho
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 3 (2011)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/30

Simulated Annealing for Solving Piecewise Linear Supplier Selection Problem Considering Quantity Discounts PDF
N. Arunkumar, L. Karunamoorthy, N. Uma Makeshwaraa
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

A Three-Phase Multicriteria Method to the Supplier Selection Problem PDF
Abraham Mendoza, E Santiago, A Ravi Ravindran
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 15, No 2 (2008)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/12

Industrial Engineering and Technology Management Interface

 Industrial Engineering Evaluation of New Technologies
 Optimization of New Technologies
 Six Sigma Studies of New Technologies
 Engineering Economy Analysis of New Technologies
 Technology Adoption - Role of Industial Engineering in Adopting Companies

Industrial Engineering in Service Industries

 Health Care

Adopting the Healthcare Failure Mode and Effect Analysis to Improve the Blood Transfusion Processes
Chao-Ton Su, Chia-Jen Chou, Sheng-Hui Hung, Pa-Chun Wang
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 8 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/58

 Oil,Gas, Water, Power Distribution

A MULTI-HIERARCHY GREY RELATIONAL ANALYSIS MODEL FOR NATURAL GAS PIPELINE OPERATION SCHEMES COMPREHENSIVE EVALUATION
Changjun Li, Wenlong Jia, Enbin Liu, Xia Wu
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 19, No 6 (2012)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/56

 Hospitality

 Education

 Government Services

 Banking, Insurance and Other Financial Services

 Telecommunications Networks

Capacity Planning In a Telecommunications Network: A Case Study PDF
Carlos Alberto Alvarez Herrera, Deniz Özdemir, Mauricio Cabrera-Ríos
International Journal of Industrial Engineering: Theory, Applications and Practice
Vol 16, No 2 (2009)
http://journals.sfu.ca/ijietap/index.php/ijie/issue/view/17

Knowledge Management

Information systems and knowledge management in industrial engineering: recent advances and new perspectives

F.B. Vernadat ORCID Icon,F.T.S. Chan ORCID Icon,A. Molina ORCID Icon,S.Y. Nof &H. Panetto ORCID Icon

Pages 2707-2713 | Published online: 02 Apr 2018

https://www.tandfonline.com/doi/full/10.1080/00207543.2018.1454615

Challenges

Factor Analysis of Obstacles Restraining Productivity Improvement Programs in Manufacturing Enterprises in Oman

Hamdi A. Bashir,1 Khalid Alzebdeh,2 and Amur M. A. Al Riyami2

Journal of Industrial Engineering, Volume 2014 |Article ID 195018 | https://doi.org/10.1155/2014/195018

https://www.hindawi.com/journals/jie/2014/195018/

The obstacles used in the survey are as follows:

(i) : insufficient investment in workforce training,

(ii) : poor financial controls and/or information systems,

(iii) : weak middle managers,

(iv) : decline of the work ethic,

(v) : no clear connection between employee effort and rewards,

(vi) : insufficient capital for improving plants and equipment,

(vii) : poor employee relations,

(viii) : weakness in industrial and manufacturing engineering,

(ix) : a piecemeal, unplanned approach to improving productivity,

(x) : inadequate/ineffective coordination among departments or functional areas,

(xi) : insufficient investment in management and supervisor training and development,

(xii) : poorly trained supervisory personnel in the area of productivity-related problems,

(xiii) O13: high worker turnover,

(xiv) O14: lack of workforce loyalty,

(xv) O15: impossibility of program implementation.

Updated 17.12.2021, 25 September 2020

20 April 2018, 16 November 2014

1 comment:

UnknownNovember 6, 2014 at 2:09 PM
INFORMATIVE-ASHOK-I AM UNABLE TO READ MANY TOPICS AS WATER MANUFACTURING PLANT,ETC,PL.POST THIS IN MY PROFILE FOR READIND AT LEISURE
ReplyDelete
Replies

Add comment

Pages