CNC Machining - Machine Tools Industrial Engineering

Contributions of Faculty of IE Departments  IE Journals






PRODUCTIVITY IMPROVEMENT OF HIGH END CNC MACHINES BY DMAIC METHODOLOGY
Veeresh Bhusnur1, , Dr. Bhimasen Soragaon2 , Hemanth Kumar C3
1 Assistant Professor, Department of Mechanical Engineering,
B.N.M Institute of Technology, Bengaluru, India
2 Professor, Department of Industrial Engineering and Management
JSS Academy of Technical Education, Bengaluru, India
3 Assistant Professor, Department of Mechanical Engineering,
B.N.M Institute of Technology, Bengaluru, India
International Journal of Engineering Research And Advanced Technology (IJERAT)
[Volume. 03 Issue.2, February– 2017]
www.sretechjournal.org

It shows the application of Six Sigma in Auma India Pvt. Ltd. to reduce the cycle time and set-up times of High End CNC machines.This work was focused on improving the production rate of CNC machines without sacrificing on quality and to improve output and productivity of the whole machining station.


TIME STUDY ANALYSIS OF LOADING AND UNLOADING OF COMPONENT FROM A CNC
FIXTURE
Apoorva M.V.1 , Dr. M. Mohan Ram2
1PG Scholar, 2Professor Department of Industrial and Production Engineering, The National Institute of Engineering, Mysuru
International Journal of Technical Research and Applications e-ISSN: 2320-8163,
 Volume 4, Issue 3 (May-June, 2016), PP. 239-243
www.ijtra.com





Development of a QFD-based expert system for CNC turning centre selection
Journal of Industrial Engineering International
December 2015, Volume 11, Issue 4, pp 575–594

Data Mining for CNC
2009
 https://books.google.co.in/books?id=keXx8EXfL6IC&pg=PA458#v=onepage&q&f=false

 Sinan Gurel, M. Selim Akturk , “Considering manufacturing cost and scheduling performance on a CNC turning machine” ,Department of Industrial Engineering, Bilkent University, 06800 Bilkent, Ankara, Turkey”, European Journal of Operational Research 177 (2007) 325–343.


A Study of the Effects of Machining Parameters on the Surface
Roughness in the End-Milling Process
Mohammed T. Hayajneh a,*, Montasser S. Tahat b , Joachim Bluhm c
a  Industrial Engineering Dep., Faculty of Engineering, Jordan University of Science and Technology, P.O. Box 3030, Irbid-22110, Jordan
b  Mechanical Engineering Department, Al-Huson Polytechnic, AlBalqa’ Applied University, P. O. Box 50, Huson-21510 , Jordan c
 Institute of Mechanics, University Duisburg-Essen, Campus Essen, 45117 Essen, Universitatsstr. 15, Germany
Jordan Journal of Mechanical and Industrial Engineering
Volume 1, Number 1, Sep. 2007, Pages 1 - 5


M. Frank, S. B. Joshi, and R. A. Wysk, “CNC-RP: A technique for using CNC machining as a rapid prototyping tool in product/process development,” in Proc. Industrial Engineering Research Conference, Orlando, FL. Citeseer, 2002.









Other Department Faculty


Cost Effective Digitalization Solution for  Sinumerik CNC System To Increase The
Transparency and Utilization of The Machine International Journal of Recent Technology and Engineering (IJRTE)
ISSN: 2277-3878, Volume-8 Issue-2, July 2019


Rapid Process Planning in CNC Machining for Rapid Manufacturing Applications
International Journal of Mechanical Engineering and Robotics Research Vol. 6, No. 2, March 2017
https://repository.lboro.ac.uk/articles/Rapid_process_planning_in_CNC_machining_for_rapid_manufacturing_applications/9564413


Optimization of roughing operations in CNC machining for rapid manufacturing processes
Muhammed Nafis Osman Zahid, Keith Case, Darren Watts
Production & Manufacturing Research
An Open Access Journal
Volume 2, 2014 - Issue 1
https://www.tandfonline.com/doi/full/10.1080/21693277.2014.938277